Skip navigation

Machines

For telephone enquiries: (00 49) 05939-94064-0
or maschinen@heinz-sanders.de
Niederlangen Branch

OPTIMUM OPTIturn TH4215D, Metal Processing, Lathes, lathe-conventional-electronic

OPTIMUM

OPTIturn TH4215D

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool ** Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm ** Quick change holder SWH5-B set

Lagernummer:
1125-2200001
turning diameter:
420 mm
turning length:
1500 mm
swing diameter over bed slide:
250 mm
Swingdiameter in the bed bridge:
590 mm
OPTIMUM OPTIturn TH 3309D, Metal Processing, Lathes, lathe-conventional-electronic

OPTIMUM

OPTIturn TH 3309D

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Fully equipped leading and tension spindle lathes. TH 3309D with digital position indicator DPA 21/3402040 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 4 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Main spindle running in an oil bath - Gear wheels run smoothly, hardened and ground - Upper slide adjustment range ± 90 ° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Handwheels decoupled and tested according to EN 23125 - Safety handwheels with push-out function in the X and Z axes - Two-channel right-left switch tested according to EN 23125 - DC 24 volt electrical system with two-channel safety circuit according to EN 23125 - Lathe chuck protection tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - Lockable main switch - Clockwise / counterclockwise rotation on the bed slide switchable - Lead screw cover - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and handwheel with adjustable fine scale 0.02 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, inductively hardened and precision ground - Machine base with tool compartment on the right-hand side (left-hand side with 3 Bezels (no compartments) - Pull-out chip tray with guide rails - Emergency stop device with foot actuation - LED machine lamp integrated in the chip guard Digital position indicator DPA 21 - User-friendly membrane keyboard, splash-proof, closed and glare-free - glass rulers scope of delivery - Fixed steady rest passage Ø 6 - Ø 50 mm - Moving steady rest passage Ø 8 - Ø 30 mm - LED machine light - Reduction sleeve MK 5 / MK 3 - Two fixed centering points MK 3 - Quadruple steel holder 16 mm - Change gears set - machine base - Initial machine filling with quality oil - operating tool ** Including special accessories OPTIMUM three-jaw lathe chuck, centric clamping Ø 200 mm Camlock DIN ISO 702-2 No. 4/3442762

Lagernummer:
1125-7375
turning diameter:
330 mm
turning length:
830 mm
swing diameter over bed slide:
196 mm
Swingdiameter in the bed bridge:
170
BULMAK / ZMM CU400/1500, Metal Processing, Lathes, lathe-conventional-electronic

BULMAK / ZMM

CU400/1500

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

- Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE

Lagernummer:
1125-2200002
turning diameter:
440 mm
turning length:
1500 mm
swing diameter over bed slide:
210 mm
Swingdiameter in the bed bridge:
620 mm
BULMAK / ZMM CU325/1000, Metal Processing, Lathes, lathe-conventional-electronic

BULMAK / ZMM

CU325/1000

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

Furnishing: - Cooling device - Machine light - chip rear wall - Spindle protection - Lathe chuck protection - Tool holder protection - Foot pedal with braking function CE - Interchangeable gears *incl. Optional equipment - 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type A, incl. 4 tool holders - 2-axis digital display DRO Newall

Lagernummer:
1125-2200003
turning diameter:
325 mm
turning length:
1000 mm
swing diameter over bed slide:
250 mm
Swingdiameter in the bed bridge:
440 mm
BULMAK / ZMM C10T, Metal Processing, Lathes, lathe-conventional-electronic
Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

- Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE

Lagernummer:
1125-2200006
turning diameter:
660 mm
turning length:
1500 mm
swing diameter over bed slide:
420 mm
Swingdiameter in the bed bridge:
850 mm
BULMAK / ZMM C10TM/3000, Metal Processing, Lathes, lathe-conventional-electronic

BULMAK / ZMM

C10TM/3000

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

- Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE

Lagernummer:
1125-2200004
turning diameter:
760 mm
turning length:
3000 mm
swing diameter over bed slide:
520 mm
centre height:
380 mm
BULMAK / ZMM CU400/1000, Metal Processing, Lathes, lathe-conventional-electronic

BULMAK / ZMM

CU400/1000

Kategorie 1:
Metal Processing
Kategorie 2:
Lathes
Kategorie 3:
lathe-conventional-electronic

- Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE

Lagernummer:
1125-2200005
turning diameter:
440 mm
turning length:
1000 mm
swing diameter over bed slide:
210 mm
Swingdiameter in the bed bridge:
620 mm