Machines

** Demonstration/demo machine (!!) ** From our showroom (like new) ** With very few operating hours Furnishing: - compact hydraulic press brake - BERNARDO NC control model E21 - swiveling control panel - electrical adjustment of the backgauge - Back stop on recirculating ball spindles - electrical adjustment of the immersion depth - Laser protection device in front - Upper deer foot tool - divided - Tool holder with quick change system - Universal die block - side + rear protective device - 2x front support arms - movable double foot switch (operation)

** with only approximately 36.160 operating hours (!!) - Inspected condition - Machine video - https://www.youtube.com/watch?v=x8Z0h2_wA6s Equipment: - CNC electro-hydraulic press brake - CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) * CNC-controlled backgauge adjustment (X-axis) * CNC-controlled vertical adjustment of the stop fingers (R1+R2) * CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) * Hand control unit for manual axes movement * Pivoting control, front left - AMADA/PROMECAM quick clamping system for the upper tool * 1 split set of offset upper tools (UKB 10.512) - AMADA/PROMECAM bottom tool holder * 1x split set of 1-V dies (UKB 20.810) - Side guards (hinged doors) - Rear guards (hinged door) - CE marking - 1x freely movable double foot switch - Operating instructions (PDF)

** Demonstration/demo machine (!!) ** From our showroom (like new) ** With very few operating hours -------------------------------------------------- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

- in checked conditions - machinevideo - https://www.youtube.com/watch?v=cp3ge7VbjTA Equipment: - NC-controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control - model "ATL 550" * Positioning of the backgauge (X axis) * Positioning of the depth adjustment (Y1 Y2 axis) * Possibility of programming different programs * Memory capacity max. 200 programs - max. 400 blocks * Swivel control panel, left front - Electro-motorized backgauge (X axis) * with 2x stop fingers, manually adjustable (R Z axis) - Tool holder system A - with top wedge crowning - Split insert/bending tools - Lateral safety guards - rear safety guard - 1x freely movable double foot switch - Operating instructions (PDF)

** current new price approx. 90.000 euros ** special price on request ------------------------------------------------------ ULTIMA PLUS electro-hydraulic press brake with: * increased installation height .. approx. 660 mm * increased cylinder stroke .. approx. 350 mm ----------------------------------------------------- - in checked condition - machine video - https://www.youtube.com/watch?v=chgCaXLnpa8 Equipment: - CNC electro-hydraulic die/press brake - CYBELEC CNC control "DNC 880 S" * swiveling control panel, front right * 2D graphic programming & product display * tool & program library - CNC controlled axes: Y1 + Y2 + X + R axis - CNC electro-motorized back stop, with ball screws (X axis) - CNC electro-motorized Height adjustment of the stop beam (R axis) - 2x manually adjustable back stop fingers (Z axis) - 2x front, movable support arms with T-slot ("Sliding System") - 1x set of bending/insert tools * AMADA / SYSTEM A tool system - Laser protection device in front of the machine - Safety device behind the machine (door) - 1x freely movable foot switch - original operating instructions

ALPMAC Manufacturer Video: https://www.youtube.com/watch?v=_FxXyPAcxlE https://www.youtube.com/watch?v=YfkX9RwWv_0 ALPMAC Product Video Model B: https://www.youtube.com/watch?v=lmT1tfy43WE --------------------------------------------------------- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: * increased installation height * increased cylinder stroke * increased throat depth -------------------------------------------------------- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMANY) ! HIGH RUNNING QUIET DUE TO LOWER OPERATING PRESSURE (50-60 dB) ! INDUCTION-HARDENED & CHROME-PLATED CYLINDER PISTONS FOR CONTINUOUS USE ! ALUMINUM CAST REAR STOP COMPONENTS ! REAR STOP WITH POWERFUL DRIVE MOTOR (1.0 kW) ! MACHINE TABLE MADE OF ROBUST & DURABLE STEEL (C45) GREEN ECO Technology: Lower consumption. More quiet. Full control. ! Peak performance with minimal energy consumption ! Maximum power at minimal cost ! Maximum performance when it's really needed ! Main motor is only activated by the foot pedal ! No energy wasted in standby mode ! Controlled start-up process Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA-66T- graphics/touchscreen * 2D graphic touchscreen programming operation * 3D display in simulation and production * 17" high-resolution color TFT screen * Bending sequence calculation * Product programming and display in actual size * USB interface - CNC controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - CNC electro-motorized backgauge (X-axis) * on ball screws * Travel: max. 750 mm * X-axis travel speed: 350 mm/s * with 2x CNC-controlled backgauge fingers - CNC electro-motorized height adjustment (R-axis) * Travel: max. 250 mm * R-axis travel speed: 300 mm/s - CNC electro-motorized table crowning - ROLLERI Rehfuß upper tool "PS 135.85-R08", System "A" * including quick-change clamping * including crowning device in the tool holder - ROLLERI split universal die block "M 460 R" * including 1x die shoe "C 1050-R" - Rear safety device: light barrier - HAWE hydraulic components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with sliding system * easily and keylessly height-adjustable - FIESSLER freely movable double foot control - CE marking / Declaration of Conformity

Equipment: - CNC electro-hydraulic folding/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language * Large tools and products library * Graphical 2D programming * automatic bending sequence calculation and collision detection * EMERGENCY stop button at the front - CNC axis adjustment: * Y1 - Y2 - X - R axis CNC crowning * Manual adjustment of the 2x stop fingers, from the front (Z axes) - CNC electro-motorized table crowning - CNC electro-pneumatic die displacement (I axis) - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic - 2x front, robust support arms - movable - 1x freely movable 2-hand/foot control - 1x free-moving foot switch - Lateral safety device (hinged doors) - rear safety device (sliding doors) - original operating instructions ( french )

Equipment: - Controlled axes Y1 + Y2 - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions

Equipment: - Cybelec DNC 34 PC control system - Controlled backgauge 700 mm (X-axis) - Hydraulic tool clamping at the top - 2 support arms with sliding system - Upper tool - Lower tool - Side + rear safety device - 2 manual foot switches

** with increased installation height / piston stroke ** very well maintained condition (!!) ** with only approx. 28.500 operating hours - in checked condition - machine video - https://www.youtube.com/watch?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control * swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. ** further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

- in checked conditions - machinevideo - https://www.youtube.com/watch?v=EcmvsA4AGfo Equipment: - simple / conventional electro-hydraulic press brake - pivoting operation, front left - electric, infinitely variable depth adjustment (Y1 Y2 axis) * Torsion shaft for parallelism - Electro-motorized backgauge (X axis) * with handwheel for fine adjustment * on recirculating ball screws * 2x manually adjustable stop fingers - manual (jog mode) and automatic cycle selector switch - manual table crowning - split set of roe foot upper tools ... H = 210 mm - 1x as good as new universal V-die block, reversible * with anti-corrosion grease * V openings in mm : 12/35/25 50 10/20/16/16 75 * Dimensions of the block in mm : 100 x 100 - 1x 1V die (continuous) - V opening in mm : 100 - various / further bending tools - 1x free-moving 2-hand/foot control - Operating instructions (PDF)

- in checked conditions - machinevideo - https://www.youtube.com/watch?v=SskqZJdQxsQ Equipment: - AMADA CNC control, model OPERATEUR II * Manual control for fine adjustment of the axes - CNC control OPERATEUR 2 in 8 axes (X1 X2,Y1 Y2,R1 R2,Z1 Z2) - CNC-controlled backgauge adjustment (X1 X2) - CNC-controlled vertical adjustment of the fence fingers (R1 R2) - CNC-controlled adjustment of the stop fingers left-right (Z1 Z2) - Swivel operation, front left - 1x freely movable foot switch - Top tool holder with top wedge crowning (AMADA system) - Rear safety guard (safety grid) - Side safety guard (safety doors) - CE marking - Original operating instructions * Further technical data : Adjustment range : X axis ... 700 mm X axis with workpiece in place ... 1020 mm R axis .. 250 mm Adjustment speed : X axis .. 500 mm/sec R axis ... 160 mm/sec Z1 Z2 axis .. 1000 mm/sec Positioning accuracy ± in mm : X axis .. 0.1 R axis .. 0.1 Z axis .. 1.0

Equipment: - DELEM DA65 CNC control - Electric backgauge (X-axis), 600 mm - Hydraulic upper tool clamping - Front light barrier - Side and rear protective grilles - Manually adjustable stop bar, foldable (R+Z-axis) - Upper tool - 2x support arms - Machine feet - Operating instructions

** from a maintenance workshop ** very good / well-maintained condition (!!) Equipment: - simple NC electro-hydraulic press brake * with torsion shaft - ATLANTIC NC control ATL 550 * Positioning of the backgauge (X) * Positioning of the depth adjustment (Y1 Y2) * Possibility of programming different programs * Memory capacity max. 200 programs - max. 400 blocks * Swivel control panel, front left - NC electro-motorized backgauge (X axis) * 2x manually adjustable stop fingers - 1x set of split roe foot upper tools - 1x rotating universal die block - 1x freely movable 2-hand/foot control - Safety guard on the side behind the machine - Operating instructions Circuit diagram

** well-maintained condition (!!) ** with only approx. 29.400 operating hours - in checked condition - machine video - https://www.youtube.com/watch?v=APP0HZjMms4 Equipment: - electro-hydraulic CNC press brake - AMADA CNC control "OPERATEUR 2" - 6 axes (X, Y1 + Y2, R, Z1 + Z2) * swiveling operation - front left * tool & program library - CNC-controlled back stop adjustment (X-axis) * adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R-axis) * adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1 + Z2) - hand control unit for manual movement of the axes - AMADA manual upper tool clamping system - AMADA Rehfuß upper tools - divided - AMADA Lower tool holder - incl. 1x V die (not complete) - AMADA DIGI PRO - gigital angle measuring system - 1x freely movable double foot switch - side protective device (swinging doors) - rear protective device (swinging door) - EMERGENCY OFF button at the front - Operating instructions (ENG)

** from a maintenance workshop ** very good conditions (!!) - in checked conditions - machinevideo - https://www.youtube.com/watch?v=PIiHc2e7h28 Features: - NC electro-hydraulic press brake - with DURMA NC control "ENC 310" * Illuminated LCD display * X-axis control & value display * Y-axis control & value display - Swiveling operator panel, front left - NC controlled axes: Y1/Y2 + X - NC electro-motorized backgauge (X-axis) * with 2x manually adjustable backgauge fingers * including lateral and height adjustment (Z+R axes) - NC electro-motorized depth adjustment (Y-axis) - AMADA/PROMECAM upper tool holder * with top wedge crowning & quick-change adapter * Split deer foot upper tool (AMADA) - AMADA/PROMECAM Lower tool holder * Split 4V universal die, in die shoe - Side guard (swinging doors) - Rear guard (swinging door) - 1x freely movable foot switch - Operating instructions (PDF)

* new control Cybelec CypTouch 12 - 3 axes * Hydraulic tool clamp * Crowning * Swivel control, right front * free-moving foot control * lateral protective device (protective grille) * rear protective device (protective grille) Machine is available in about 1-2 months !!

- in checked condition - machine video - https://www.youtube.com/watch?v=ebbbzSYMxKw Furnishing: - electro-hydraulic CNC die bending/press brake - CYBELEC CNC control "ModEva 12S", swiveling at the front right * High-resolution graphic color screen 14 inches * Representation as a line, area or volume drawing of the product * Clear, concise menus in the operator's language * Large tools and products library - CNC-controlled back gauge adjustment (X-axis) * Stop range X axis of bending line .. 5.0 - 1.000 mm * Adjustment speed .. max. 250 mm/sec. - CNC-controlled vertical adjustment of the stop fingers (R axis) * Adjustment range of table surface .. 115 - 265 mm * Adjustment speed .. max. 100 mm/sec. * Adjustment via SERVO motors - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2 axis) * Adjustment range Z1 .. 405 - 2565 mm * Adjustment range Z2 .. 485 - 2645 mm * Adjustment speed .. max. 1000 mm/sec. - WILA CNC-controlled electric table crowning - pneumatic EHT upper tool clamping - manual lower tool clamping - 1x freely movable 2 hand/foot control - 2x front, movable support arms - rear protective device (sliding protective grille) - side protection device (pivoting protective grille) - 1x set of EHT deer foot upper tool - split (3.000 mm) - 1x set of EHT lower tools - split (3.000 mm) - original operating instructions (machine + control)

** current new price approx. 80.000 euros ** special price on request ** good / well-maintained condition (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=5L8L2AYv0PU ------------------------------------------------------- PLACKE electro-hydraulic CNC press brake specially developed for the production of small parts The advantages: • Low energy consumption • High operating comfort • Wide range of applications • Fast, robust, low-noise • With CNC control as standard ------------------------------------------------------ Equipment: - CNC electro-hydraulic press brake with 1x working cylinder - DELEM CNC control model "DM 51" - CNC controlled axis: Y1 - Y2 - X - CNC electro-motorized back stop * Travel path: X = max. 600 mm * Travel speed X axis .. max. 300 mm/s * Positioning accuracy .. +/- 0.02 mm * with 2x manually adjustable stop fingers (R+Z axis) - WILA standard - manual upper tool clamping - WILA standard - manual lower tool clamping - PLACKE safety device at the front: light barrier - side protective device (swivel doors) - rear protective device (swivel + lockable door) - front storage area - side sorting system for bending tools - 1x freely movable foot control - original operating instructions including circuit and hydraulic diagram

** with increased installation height / piston stroke ** well-maintained condition (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=ikl6RNZWeiU Equipment: - CNC electro-hydraulic press brake - including CYBELEC CNC control * swiveling control panel at the front right * external screen - CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) * Travel range .. 5.0 - 1,000 mm * Travel speed .. 250 mm/sec. - CNC electro-motorized height adjustment of the back stop (R axis) * Travel range .. 70 - 235 mm * Travel speed .. 100 mm/sec. - CNC electro-motoric adjustment of the stop fingers (Z axes) * Travel range Z1 .. 405 - 1.565 mm * Travel speed .. 1.000 mm/sec. * Travel range Z2 .. 485 - 1.645 mm * Travel speed .. 1.000 mm/sec. - CNC electro-motoric table crowning - CNC pneumatic die displacement (I axis) - EHT pneumatic tool clamping - upper tool - EHT manual tool clamping - lower tool * Tool holder 90.0 mm + 13.0 mm possible - 1x freely movable 2-hand/foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging door) - original operating instructions + circuit diagram etc. * Special accessories included: - Oil cooler for use in continuous operation

- in checked conditions - machinevideo - https://www.youtube.com/watch?v=l9CdurfDGb0 Features: - NC-controlled hydraulic press brake - with ATLANTIC NC control "ATS 585" * Rear stop positioning (X-axis) * Depth adjustment positioning (Y1, Y2 axes) * Ability to program various programs * Swiveling control panel, front left * Tool and program library - NC electric-motor-driven material/backgauge (X-axis) * With 2 stop fingers, manually adjustable (R and Z axes) - Tool holder system A - with upper wedge camber - Split insert/bending tools - DSP LASER "RX" safety device - front - 2x side, swiveling safety doors - 1x freely movable double foot control - Operating instructions ** Also included in the scope of delivery (pre-installed): - 1x brand-new / split set of upper tools * UKB 11,200 mm - 2x 835 mm * Angle 85° - Radius R 0.8 mm - Height 66.5 mm * Load capacity 1000 kN/m max - 1x brand-new / split set of lower tooling * UKB 21.207 - 2x 835 mm * V-openings = 16/22/35/50 mm * Angle 85° * Load capacity 800 kN/m max.

- in checked conditions - machinevideo - https://www.youtube.com/watch?v=Phcik_oo4CE Equipment: - BEYELER electro-hydraulic CNC press brake - CNC CYBELEC control unit “DNC 1200 PS/B” * High-resolution screen * Clear, concise menus in the operator's language * Tool and product library * Swiveling control panel, front right - CNC-controlled axes (Y1+Y2-X) - CNC-controlled backgauge adjustment (X-axis) * 2x manually adjustable stop fingers - Manual upper tool clamping - Manual lower tool clamping - Rear safety device (safety door) - Side safety device (safety doors) - Bending tools * 1x set of split upper tools (ROLLERI TOP 175.26.R08) * 1x set of split 1V dies (V 12 mm) - 2x freely movable 2-hand controls - 2x freely movable foot switches - Operating instructions for control system

** Good/well-maintained condition (!!) - in checked conditions - machinevideo - https://www.youtube.com/watch?v=IKyUmzB0WTI ------------------------------------------------- CNC electro-hydraulic press brake with: * Increased installation height .. approx. 550 mm * Increased cylinder stroke .. approx. 390 mm ------------------------------------------------- Features: - Robust electro-hydraulic press brake * MADE IN GERMANY (!!) - CYBELEC CNC control "DNC 904 PS-A" (SN 0332) * Pivoting, front right * High-resolution graphic display * Clear, easy-to-read menus in the operator's language * Large tool and product library * Graphic 2D programming * Automatic bending sequence calculation - CNC-controlled axis adjustment: Y1+Y2 / X / R axes - CNC electro-motorized backgauge (X axis) * With 4 manually adjustable stop fingers - CNC Electric height adjustment (R axis) - WEINBRENNER electro-hydraulic upper tool clamp - WEINBRENNER electro-hydraulic lower tool clamp - 1x freely movable 2-hand/foot control - 2x front, movable support arms - Side safety device (swinging doors) - Rear safety device (swinging doors) - Machine/control manual + circuit diagram

** Machine in a well-maintained condition (!!) ** with only approx. 31.800 operating hours - in checked condition - machine video - https://www.youtube.com/watch?v=PBV-MDtZnlE Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * Tool & program library * USB keyboard and mouse interface - CNC controlled axes: Y1 + Y2 / X1 + X2 / R1 + R2 / Z1 + Z2 / I axis - CNC controlled back stop (X1 + X2 axis) - CNC controlled height adjustment of the back stop (R1 + R2 axis) - CNC controlled adjustment of the stop fingers (Z1 + Z2 axis) - CNC controlled, pneumatic die displacement (I axis) - CNC WILA electro-motoric table crowning - TRUMPF hydraulic upper tool clamping - TRUMPF manuel Lower tool clamp - 1x freely movable 2-hand / foot control - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + spare parts list

- in checked conditions - machinevideo - https://www.youtube.com/watch?v=Gn6PZEMmnmY Features: - Robust CNC-controlled hydraulic press brake - With DELEM CNC control unit “DM 51” * Positioning of the backgauge (X axis) * Positioning of the depth adjustment (Y1+Y2 axis) * Program + tool storage possible * Swiveling control panel, front left - CNC electric motor-driven backgauge (X axis) - CNC electric motor-driven height adjustment of the stop (R axis) - 2x manually adjustable stop fingers - 1x split set of deer foot tools - top - 1x split set of Multi V tools - bottom (16/22/35/50 mm) - Side safety device (swivel doors) + FIESSLER laser safety device - Rear safety device (swivel door) - 1x freely movable double foot switch - 2x front support arms - Machine operating instructions + CE declaration

- in checked conditions - machinevideo - https://www.youtube.com/watch?v=WRzqKruFUvY Equipment: - CNC electro-hydraulic press brake - CYBELEC "DNC 60 PS" CNC control * Swiveling control panel, front left * Tool & program library - CNC electro-motorized backgauge (X-axis) * X-axis travel = 800 mm * 2x manually adjustable backgauge fingers (R+Z axes) * Backgauge on ball screws - CNC controlled axes Y1 - Y2 - X - Rehfuß upper tool system "A" with quick-change clamping * Additional crowning device in the tool holder - 4V universal die block with 60 mm die shoe - 2x sliding material/support arms ("Sliding System") - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine - FIESSLER AKAS laser safety device in front of the machine - 1x freely movable Double Foot Switch - Operating Instructions (PDF)

Equipment: - electro-hydraulic NC press brake - easy to operate - HACO NC control model ATS 560 * 7-digit LED display * Memory capacity for 200 programs with a maximum of 400 sets * Working with pressure and immersion depth * Inching function for electric backgauge * Set / actual value input for back gauge * Swiveling control panel, left front - NC controlled axes : Y1 Y2 X axis - NC electro-hydraulic synchronization and immersion depth positioning - NC electro-motorized backgauge * with ball screws * speed 240 mm/sec. * including 2x manually adjustable stop fingers in width and height * backgauge programmable to an accuracy of 0.1 mm - Manual table crowning, with handwheel and analog display - "SYSTEM A" top tool holder, incl. top wedge crowning - "SYSTEM A" bottom tool holder - Various insert/bending tools - 1x freely movable 2-hand/foot control * only moves at working speed - Operating instructions ** also included in the scope of delivery (built-in): - 1x brand new / split set of upper tools * UKB 11,200 mm - 3x 835 mm * Angle 85° - Radius R 0.8 mm - Height 66.5 mm * Load capacity 1000 kN/m max - 1x brand new / split set of bottom tools * UKB 21.207 - 3x 835 mm * V openings = 16/22/35/50 mm * Angle 85° * Load capacity 800 kN/m max.

** good/well-Maintained conditions ** used in Aluminum processing - in checked conditions - machine Video - https://www.youtube.com/watch?v=z-Bxibk_8uE Features: - CNC Electro-Hydraulic Press Brake - CYBELEC CNC Control Model DNC 1200 PS/B * Swiveling Control Panel, Front Right * Numerical Programming * Tool & Program Library - CNC Controlled Axes: Y1 + Y2 + X + R + CNC Crowning - CNC Electro-Motorized Backgauge (X-Axis) * with 3x Manually Adjustable Backgauge Fingers (Z-Axis) * Maximum Travel Speed: 250 mm/sec - CNC electro-motorized height adjustment from the backgauge (R-axis) * Maximum travel speed: 100 mm/sec. - CNC under-table crowning - CNC pneumatic die shifting (I-axis) - Pneumatic upper tool clamping - Pneumatic lower tool clamping - Rear safety guard, including swiveling door - 2x side safety guards - includes LAZER SAFE safety device - front - 2x stable front support arms with sliding system - original EHT split upper and lower tools - 1x freely movable 2-hand/foot control - Wiring diagram + hydraulic diagram

- in checked conditions - machinevideo - https://www.youtube.com/watch?v=bUaEa_nHZ6E Equipment: - NC electro-hydraulic press brakes - with NEW ELGO NC control unit "P40" * New price approx. 4.000 Euro * Control / movement of the backgauge - X axis (target/actual input) * Control / movement of the depth setting - Y axes (target/actual input) * Inching mode for X axis Y axes also possible - Swivel operation, front left - NC controlled axes : Y1 Y2 X - NC electro-motorized backgauge (X axis) * with 2x manually adjustable stop fingers * including lateral and height adjustment (Z R axis) - 1x branded set of upper tools (split) - 1x branded Multi-V bottom die block - Lateral safety guard (hinged doors) - Rear safety guard (hinged door) - 1x free-moving 2-hand/foot control - Operating instructions (PDF)

** well-maintained condition (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=rPOBwTfVReo Equipment: - simple, conventional hydraulic press brake - swiveling control panel, left front - electro-motoric back stop (X axis) * adjustment via front control panel (button) * with analog position display * fine adjustment via handwheel, front - with 3x stop fingers, manually adjustable - electro-motoric depth adjustment (Y1+Y2 axis) * with analog position display - 1x split set of 85° deer foot upper tool - 1x MultiV - universal die block, with several V-openings - 2x front, stable support arms - 1x freely movable double foot switch - 1x freely movable 2-hand control - side safety device (swivelling doors) - rear safety device (sliding door) - original operating instructions

** well-maintained condition ** from a maintenance workshop (!!) Equipment: - simple, conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electro-motor-driven back stop, with ball screws (X axis) * with 2x manually adjustable stop fingers * fine adjustment via handwheel at the front, with analog position display - electro-motor-driven adjustment of the immersion depth (Y1+Y2 axis) * with digital position display - swiveling operation, left-hand side - split deer foot + pointing tool - 1x rotatable Multi V universal die block - 1x freely movable 2-hand foot control - operating instructions

Equipment: - Controlled axes: Y1, Y2, X - Electric rear stop, adjustable from the front * Fine adjustment via hand crank* - 2 front support arms - Upper tool - Lower tool = die block - Rear + side safety device - Foot control

** from a maintenance workshop ** well-maintained condition (!!) - in checked condition - machine video - https://www.youtube.com/watch?v=o_t9BBMsNNs Equipment: - simple, conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electric back stop, with ball screws (X axis) * with 4x manually adjustable stop fingers * fine adjustment via handwheel at the front, with analog position display - electro-motor adjustment of the immersion depth (Y1 + Y2 axis) * with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools - 1x rotatable MULTI V universal die block - 2x front / movable support arms - 1x freely movable 2-hand foot control - operating instructions (PDF)

** good / well-maintained condition (!!) - Inspected condition - Machine video - https://www.youtube.com/watch?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2 - CNC-controlled backgauge adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R-axes) - CNC-controlled left-right adjustment of the stop fingers (Z-axes) - Freely movable two-hand control & foot switch - Tool crowning - AMADA type - Various tools - CE marking - Side guards (hinged doors) - Rear guards (hinged door) - 2x emergency stop buttons at the front - Operating instructions

** Current new price approx. 85.000 euros ** Special price on request Features: - Electro-hydraulic CNC press brake - With DELEM CNC control model “DA 66W” * 2D graphic programming * Automatic bend sequence calculation and collision detection * High-quality LCD screen (TFT) * Swivel control panel, front left - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC electric motor-driven backgauge (X axis) * with 2x manually adjustable stop fingers - CNC electric motor height adjustment of the backgauge (R axis) - CNC electric motor table crowning - ROLLERI upper tool adapter (quick-change clamping) * including crowning device in the tool holder - 2x front, sliding support arms (“sliding” system) - Side guard (swivel doors) - Rear guard (sliding door) - 1x freely movable 2-hand/foot control - Operating instructions (PDF)

** Machine in good condition ** Regularly serviced by the manufacturer ** CNC backgauge with 8 axes (!!) - in checked conditions - machinevideo - https://www.youtube.com/watch?v=yEaRj0XJAC4 Equipment: - CNC electro-hydraulic press brake/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language * Large tool and product library * Graphic 2D programming * Automatic bend sequence calculation and collision detection * Emergency stop button at front - CNC axis adjustment: * Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 axis + CNC crowning - X axis - adjustment speed: 500 mm/sec. * Max. stop range: 860 mm - R axis - Adjustment speed: 300 mm/sec. * Max. travel: 250 mm - Z axis - Adjustment speed: 1000 mm/sec. * Max. travel: 3260 mm - CNC electric motor table crowning - CNC electro-pneumatic die shift (I axis) - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic - 2x front, robust support arms - movable - 1x freely movable 2-hand/foot control - 1x freely movable foot switch - Side safety device (swivel doors) - Rear safety device (sliding doors) - Original operating instructions

** From a maintenance workshop ** Good / well-maintained condition ** With only approx. 14.100 operating hours (!!) - in checked conditions - machinevideo - https://www.youtube.com/watch?v=wtEBQ0UawQ8 Equipment: - CNC electro-hydraulic press brake - DELEM CNC control - model "DA 58" * Swiveling control panel, front left * 2D graphic programming & product display * Tool & program library - CNC-controlled axes: * Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning - CNC electro-motorized backgauge (X axes) * Stop system with 2x CNC-controlled gantries - CNC electro-motorized height adjustment of the backgauge (R axes) - CNC electro-motorized adjustment of the stop fingers (Z axes) - Manual upper tool clamping - Manual lower tool clamping - Various split upper and lower tools - 2x stable, movable Front support arms - 1x freely movable 2-hand/foot control - Side guard (swinging doors) - Rear guard (swinging door) - Original operating instructions + control unit - Manufacturer's CE declaration

- in checked condition - machine video - https://www.youtube.com/watch?v=23IbxRaZ2KA Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * tool & program library * including new TFT-LCD industrial monitor - CNC controlled axes: Y1 + Y2 / X / R - CNC electro-motor / controlled back stop (X axis) - CNC electro-motor / controlled height adjustment (R axis) - manual adjustment of the 2x stop fingers, from the front (Z axes) - manual adjustment of the die displacement, from the front (I axis) - WILA manual table crowning, including analog value display - TRUMPF hydraulic upper tool clamp - TRUMPF manual lower tool clamp - 1x freely movable 2 hand / foot control - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + CE declaration + circuit diagram