Skip navigation

Machines

For telephone enquiries: (00 49) 05939-94064-0
or maschinen@heinz-sanders.de
Niederlangen Branch

BERG & SCHMID GBS 242 DG Auto CUT, Metal Processing, Saws, Band Saw

BERG & SCHMID

GBS 242 DG Auto CUT

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Lagernummer:
1125-5283
cutting diameter:
250 mm
saw band length:
2965 mm
table height:
-- mm
:
285 mm
BERG & SCHMID GBS 218 Eco AutoCut, Metal Processing, Saws, Band Saw

BERG & SCHMID

GBS 218 Eco AutoCut

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Lagernummer:
1125-4100
cutting diameter:
220 mm
saw band length:
2455 mm
cutting width:
230 mm
cutting speed:
35 + 70 m/min
BERNARDO HBS 275, Metal Processing, Saws, Band Saw

BERNARDO

HBS 275

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Equipment: - For cutting profiles, pipes, solid materials made of iron - and non-ferrous materials - the saw frame can be swiveled up to 60 ° for miter cuts - Infinitely variable lowering via hydraulic lowering cylinder - Torsion-free, strongly dimensioned saw arm made of gray cast iron - 2 Saw band speeds for optimal cutting results (400 V) - robust Construction, therefore quiet and vibration-free running - automatic Limit switch-off according to material average - Robust vice made of gray cast iron with quick lock - ball-bearing saw band guide with quick adjustment to adapt to the workpiece width - guarantees an optimal work result Scope of delivery: - saw band - workpiece stop - underframe - manometer for Belt tensioning - Vice with quick lock - Coolant device - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch - Operating instructions in German - Chip clearing brush (Art-No: 04-1696)

Lagernummer:
1125-6969
cutting diameter:
225 mm
saw band length:
2480 mm
cutting width:
150 mm
table height:
910 mm
MEP - Halbautomat Shark 332-1 SXI evo, Metal Processing, Saws, Band Saw

MEP - Halbautomat

Shark 332-1 SXI evo

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Powerful miter band saw for cuts from 45 ° right to 60 ° Left Electro-hydraulic semi-automatic machine with microprocessor control New version: now with anti-vibration rollers and an even more powerful gear size 75 and considerably reinforced cast steel saw frame Control modes: Manual mode Semi-automatic dynamic operation (The semi-automatic cut is made by manual approach of the saw bow from any position via actuation of the handset started) Semi-automatic operation (start / stop position of the saw bow is controlled by the Keyboard programmed Vice closes / opens automatically, the saw curve becomes the start of the cut automatically returned) Description: Stable, torsion-resistant and low-vibration saw frame made of cast steel Carbide band guides for maximum cutting precision Large deflection discs, adjustable, made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and internal Table clamp for intermediate angles. Interchangeable material supports made of steel Control panel on vertical post, swiveling, contains all control elements Control with soft-touch keyboard, backlit display for display all machine parameters and messages in plain text, including: Number of cuts (piece counter), cutting time, power consumption of the Saw band motor, saw band tension in kg (minimum band tension = 900 kg), Saw frame position (Y-axis), alarms / faults (description and causes), Diagnosis… Saw band tension with band tension control and indication on the display by means of electronic converter Base with lockable door Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for Chip removal from the work area Coolant gun for cleaning the machine Vice with quick adjustment and interchangeable clamping and Stop jaws Chip removal brush for cleaning the saw band Machine is prepared for all options (see price list). (Electric wire, Software etc.) Standard equipment: Bi-metal saw band Adjustable length stop 600 mm Tool kit Detailed operating instructions, maintenance manual, circuit diagrams and Exploded view Attachment adapter for supply roller conveyor including 1 support roller Entry possibility for forklifts / pallet trucks

Lagernummer:
1125-3789
cutting diameter:
300 mm
saw band length:
3650 mm
cutting width:
330 mm
:
40 / 80 m/min
MEP - Halbautomat Shark 282 SXI evo, Metal Processing, Saws, Band Saw

MEP - Halbautomat

Shark 282 SXI evo

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Powerful miter band saw for cuts from 45 ° right to 60 ° Left Electro-hydraulic semi-automatic machine with microprocessor control and 4 Modes of operation Description: - Indexing at 0 ° / 45 ° / 60 ° and internal table clamp for Intermediate angle - Control panel on vertical post, swiveling, contains all Controls - Control with soft-touch keyboard, backlit display for display all machine parameters and messages in plain text, including: Number of cuts (piece counter) / cutting time / power consumption of the Saw band motor / saw band tension in kg (minimum band tension = 900 kg) / Saw frame position (Y-axis) / Alarms / Faults (description and causes) / Diagnosis… - Saw band tension with band tension control and indication on the display by means of electronic converter - Underframe with lockable door and removable coolant tray electric coolant pump - Vice with quick adjustment - Chip removal brush for cleaning the saw band Standard equipment: - Bi-metal saw band - Adjustable length stop 600 mm - tool kit - Detailed operating instructions, maintenance manual, circuit diagrams and Exploded view - Attachment adapter for supply roller conveyor incl. 1 support roller - Entry possibility for forklift / pallet truck transport

Lagernummer:
1125-4576
cutting diameter:
250 mm
saw band length:
2950 mm
cutting width:
280 mm
turning speed range::
36 / 72 m/min
FEMI N251 DA XL, Metal Processing, Saws, Band Saw

FEMI

N251 DA XL

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

technical features - Powerful three-phase induction motor with 2 speeds and Gearbox with oil bath - Saw arch, vice and swivel group made of cast steel - Steel saw band guide with ball bearings - Vice with quick release - Front integrated lever for locking the miter adjustment - Coolant pump with aluminum body - Large handwheel for easy saw band tension - Pressure gauge to display the belt tension (600-1000 kg / cm3) STANDARD EQUIPMENT - Mountable base cabinet - coolant tank - Electric coolant pump - Length stop for series cuts - Tools for changing belts and for adjustments - Chip removal brush - Hydraulic cylinder with feed control

Lagernummer:
1125-7322
cutting diameter:
225 mm
saw band length:
2480 mm
cutting width:
250 mm
:
2480 x 27 x 0,9 mm
FEMI N257 DADG, Metal Processing, Saws, Band Saw

FEMI

N257 DADG

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Manual cutting cycle AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring Stable, torsion-resistant and low-vibration saw frame made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and inside Table clamp for intermediate angles Vice with quick adjustment Carbide band guides for maximum cutting precision Large deflection discs, adjustable, made of cast steel Hydraulic unit for the saw band tension and monitoring with display Manometer (belt tension = 900 kg) Clear switchboard with all controls Underframe with lockable door and removable coolant tray, electric coolant pump Chip removal brush for cleaning the saw band

Lagernummer:
1125-7246
cutting diameter:
225 mm
saw band length:
2480 mm
cutting width:
253 mm
:
2480 x 27 x 0,9 mm
MEP Shark 282 CCS, Metal Processing, Saws, Band Saw

MEP

Shark 282 CCS

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Manual cutting cycle AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring Stable, torsion-resistant and low-vibration saw frame made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and inside Table clamp for intermediate angles Vice with quick adjustment Carbide band guides for maximum cutting precision Large deflection discs, adjustable, made of cast steel Hydraulic unit for the saw band tension and monitoring with display Manometer (belt tension = 900 kg) Clear switchboard with all controls Underframe with lockable door and removable coolant tray, electric coolant pump Chip removal brush for cleaning the saw band

Lagernummer:
1125-3925
cutting diameter:
250 mm
saw band length:
2950 mm
cutting width:
280 mm
:
2950 x 27 x 0,9 mm
MEP Shark 332-1 CCS, Metal Processing, Saws, Band Saw

MEP

Shark 332-1 CCS

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and shutdown at the end of the cut) New version: now with anti-vibration rollers and an even more powerful gear size 75 and considerably reinforced cast steel saw frame Description: CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and shutdown at the end of the cut) Either automatic or manual cutting cycle Stable, torsion-resistant and low-vibration saw frame made of cast steel Carbide band guides for maximum cutting precision Large deflection discs, adjustable, made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and internal Table clamp for intermediate angles. Interchangeable material supports made of steel Control panel on vertical post, swiveling, contains all control elements Saw band tension with band tension control and indication on the display by means of electronic converter Base with lockable door Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for Chip removal from the work area Coolant gun for cleaning the machine Vice with quick adjustment and interchangeable clamping and Stop jaws Chip removal brush for cleaning the saw band Machine is prepared for all options (see price list). (Electric wire, Software etc.) Standard equipment: Bi-metal saw band Adjustable length stop 600 mm with millimeter scale Tool kit Detailed operating instructions, maintenance manual, circuit diagrams and Exploded view Attachment adapter for supply roller conveyor including 1 support roller Entry possibility for forklifts / pallet trucks

Lagernummer:
1125-7075
cutting diameter:
300 mm
saw band length:
3650 mm
cutting width:
330 mm
capacity 90 degrees: round:
300 mm
MEP Shark 281 CCS, Metal Processing, Saws, Band Saw

MEP

Shark 281 CCS

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Hydraulic unit for the saw band tension and monitoring with display on Manometer (belt tension = 900 kg) -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band

Lagernummer:
1125-4278
cutting diameter:
250 mm
saw band length:
2950 mm
cutting width:
280 mm
dimensions of saw-band:
2950 x 27 x 0,9 mm
MEP - Halbautomat SHARK 331-1 NC 5.0 SPIDER, Metal Processing, Saws, Band Saw

MEP - Halbautomat

SHARK 331-1 NC 5.0 SPIDER

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Electro-hydraulic automatic miter band saw for cuts from 0 ° to 60 ° left -new, innovative (Windows CE based) touch screen control -Cutting area around max. 280 mm (solid material) - Required space only 3.42 square meters New version: now with anti-vibration rollers and an even more powerful gear size 75 and considerably reinforced cast steel saw frame - Semi-automatic operation (start / stop position of the saw bow is programmed via the keyboard. Vice closes / opens automatically, The saw arch is automatically returned to the start of the cut) - Fully automatic operation (10 programs, each with different Quantity (max. 9999) and length (max. 9999.9 mm) with an accuracy of ± 0.1 / 600 mm. Execution of up to 10 combined programs in one cycle. Three different cutting cycles can be selected - Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision - Large-sized deflection discs, adjustable made of cast steel with integrated belt circulation control - Dynamic cutting pressure control (variably programmable, control via Stepper motor due to the torque monitoring of the belt drive) - Precise adjustment of the cutting feed with information in mm / min. - Frequency converter for stepless drive of the tool - X-axis (material feed) via recirculating ball spindle with at least remaining piece 210 mm - Control (Windows CE based) with 7 "touch screen and additional soft- Buttons, backlit display to show all Machine parameters and messages in plain text: Number of cuts (programmed / executed) / cutting speed / lowering speed / preselectable Cutting pressure (in amps) / cutting time / power consumption of the saw band motor / Saw band tension in kg (minimum band tension = 900 kg) / saw frame position (Y- Axis) / feeder position (X-axis) / alarms / faults (description and Causes) / diagnostics ... - Saw band tension with band tension control and indication on the display by means of electronic converter - Base with door - Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for Chip removal from the work area, removable coolant tray 100 liters - Coolant gun for cleaning the machine - Vice with quick adjustment and exchangeable clamping and Stop jaws - Chip removal brush for cleaning the saw band

Lagernummer:
1125-6976
cutting diameter:
300 mm
saw band length:
3650 mm
cutting width:
330 mm
dimensions of saw-band:
3650 x 27 x 0,9 mm
MEP PH 261-1 HB, Metal Processing, Saws, Band Saw

MEP

PH 261-1 HB

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Compact, powerful workshop miter band saw machine for cuts from 0 ° to 60 ° left AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring Description: -Manual cutting cycle and automatic cutting -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Saw band tension with limit switch to check the correct band tension -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band

Lagernummer:
1125-3916
cutting diameter:
225 mm
saw band length:
2450 mm
table height:
mm
cutting width:
240 mm
MEP - Halbautomat SHARK 512 SXI evo, Metal Processing, Saws, Band Saw

MEP - Halbautomat

SHARK 512 SXI evo

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Powerful miter band saw for cuts from 60 ° right to 60 ° Left With saw band 34 x 1.1 mm (5.5 kW frequency converter, 4 kW belt drive motor) Electro-hydraulic semi-automatic machine with microprocessor control Functionality: -Semi-automatic operation (start / stop position of the saw bow is controlled via the Keyboard programmed. Vice closes / opens automatically, saw bow is automatically returned to the beginning of the cut) Features: -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision. Front, adjustable Tape guide holder on linear guides for easy, fast and accurate Adjustment for the cutting area -Large dimensioned deflection discs, adjustable made of cast steel -Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with precision stops at 0 ° / 45 ° / 60 ° and Table clamp for intermediate angles -Control panel, swiveling, contains all operating elements -Control with soft-touch keyboard, backlit display for display all machine parameters and messages in plain text, including: -Number of cuts (piece counter), cutting time, power consumption of the Saw band motor, saw band tension in kg (minimum band tension = 900 kg), Saw frame position (Y-axis), alarms / faults (description and causes), Diagnosis… -Saw band tension with band tension control and indication on the display by means of electronic converter -Frequency converter for stepless drive of the tool -Underframe with lockable door -Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for Removal of chips from the work area -Coolant gun to clean the machine -Vise with quick adjustment and exchangeable clamping and Stop jaws, lateral adjustment on linear guides - Chip removal brush, driven, for cleaning the saw band -Machine is prepared for all options (see price list). (Electric wire, Software etc.) Standard equipment: -Bi-metal saw band -Adjustable length stop 600 mm with millimeter scale Tool kit -Detailed operating instructions, maintenance manual, circuit diagrams and Exploded view -Adapter for supply roller conveyor incl. 1 support roller - Entry option for forklift / pallet truck transport

Lagernummer:
1125-6614
cutting diameter:
330 mm
saw band length:
4640 mm
cutting width:
510 mm
capacity 90 degrees: flat:
510 x 320 mm
MEP PH 211 -1 HB, Metal Processing, Saws, Band Saw

MEP

PH 211 -1 HB

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Compact, powerful workshop miter band saw machine for cuts from 0 ° to 60 ° left Automatic cut (HB) and manual cut Description: -Manual cutting cycle and automatic cutting -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Saw band tension with limit switch to check the correct band tension -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -päneräumb Brush for cleaning the saw band

Lagernummer:
1125-5374
cutting diameter:
180 mm
saw band length:
2130 mm
cutting width:
200 mm
dimensions of saw-band:
2130 x 20 x 0,9 mm
MEP - Vollautomat SHARK 332-1 NC 5.0, Metal Processing, Saws, Band Saw

MEP - Vollautomat

SHARK 332-1 NC 5.0

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Powerful miter band saw for cuts from 45 ° right to 60 ° left Electro-hydraulic CNC machine with Windows CE based touch screen control -Automatic cycle (cuts from 0 ° to 60 ° left) -Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right to 60 ° left). -Manual or semi-automatic dynamic cycle to make cuts outside of series production directly without programming. -Numerically controlled band saw machines with the new Windows “CE” based control, specially developed by MEP for automatic machines. FEATURES: -User interface with 7 ”touch screen display and mechanical keys for the operating functions of the sawing machine, guarantees reliable operation, simple and intuitive, and real-time control of all cutting parameters. - Protective housing for the safety of the worker -The control console on a swiveling arm enables comfortable and safe operation from any position. -Display and entry of alarm and error messages with the option of displaying incidents that have occurred. - Infinitely variable regulation of the cutting speed from 15 to 100 m / min via frequency converter (inverter). -The latest generation of hydraulic power pack, extremely powerful with low energy consumption. -Material feed with stepper motor via ball screw mounted on opposing ball bearings; 600 mm repeatable single stroke to saw any length. -Positioning of the saw head and movement of the feeder using a joystick. -Automatic detection of the cutting start position. -Hand-operated strap tension control with indication on the display by means of an electronic converter. -Automatic monitoring of the cutting load through a servo valve mounted directly on the cylinder. -The coolant pan (equipped with 2 electric pumps for lubrication and cooling of the saw band) is built into the underframe -The chip drawer can be replaced by a motorized chip conveyor - see special accessories. -Preparation for the installation of the OPTIONAL minimum quantity lubrication system in addition to the conventional standard lubrication with emulsion oil. -Schipping brush. -Bimetal saw band for solid and profile material. -Tool and instructions for use with list of spare parts.

Lagernummer:
1125-7228
cutting diameter:
300 mm
saw band length:
3650 mm
cutting width:
330 mm
dimensions of saw-band:
3650 x 27 x 0,9 mm
BERG & SCHMID GBS 240 Auto CUT, Metal Processing, Saws, Band Saw

BERG & SCHMID

GBS 240 Auto CUT

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Miter left 60 ° Quick-release vice can be moved in the X-Y axis Quick release lever for easy handling Machine base with automatic cooling Electrical monitoring of band tension + band breakage, saw band cover. The saw only runs when it is OK. AutoCut additionally: Economical, semi-automatic operation through automatic saw frame lowering - continuously adjustable Hydraulic brake cylinder for stepless feed via limit switch Rapid traverse (rapid approach to the workpiece) Manual operation possible

Lagernummer:
1125-6142
cutting diameter:
240 mm
saw band length:
2730 mm
cutting width:
270 mm
cutting speed:
37 + 74 m/min
MEP - Halbautomat Shark 382 SXI evo, Metal Processing, Saws, Band Saw

MEP - Halbautomat

Shark 382 SXI evo

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Control modes: -Manual mode -Semi-automatic-dynamic operation (the semi-automatic cut is started by manually approaching the saw bow from any position by actuating the hand switch) -Semi-automatic operation (start / stop position of the saw bow is programmed via the keyboard, vice closes / opens automatically, saw bow is automatically returned to the start of the cut) Features: -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Large, easily adjustable and mounted turntable, turntable centered by central axis bolts with indexing at 0 ° / 45 ° / 60 ° and internal table clamp for intermediate angles. Interchangeable material supports made of steel -Control panel on vertical post, swiveling, contains all operating elements -Control with soft-touch keyboard, backlit display for displaying all machine parameters and messages in plain text, including: -Number of cuts (piece counter), cutting time, power consumption of the saw band motor, saw band tension in kg (minimum band tension = 900 kg), saw frame position (Y-axis), alarms / faults (description and causes), diagnostics ... -Saw band tension with band tension control and indication on the display by means of an electronic converter -Underframe with lockable door -Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for removing chips from the work area -Coolant gun to clean the machine -Vise with quick adjustment and exchangeable clamping and stop jaws -Schipping brush for cleaning the saw band -Machine is prepared for all options (see price list). (Cables, software etc.) Standard equipment: -Bi-metal saw band -Adjustable length stop 600 mm Tool kit -Detailed operating instructions, maintenance manual, circuit diagrams and exploded views -Adapter for supply roller conveyor incl. 1 support roller - Entry option for forklift / pallet truck transport

Lagernummer:
1125-6250
cutting diameter:
300 mm
saw band length:
3320 mm
table height:
-- mm
:
330 mm
BERG & SCHMID - Halbautomat GBS 305 HA-I Easy, Metal Processing, Saws, Band Saw
Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Lagernummer:
1125-6517
cutting diameter:
305 mm
saw band length:
3375 mm
cutting width:
350 mm
dimensions of saw-band:
3375 x 27 x 0,9 mm
MEP - Halbautomat Shark 281 SXI evo, Metal Processing, Saws, Band Saw

MEP - Halbautomat

Shark 281 SXI evo

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

powerful, electro-hydraulic, semi-automatic band saw machine for Miter cuts from 0 ° to 60 ° left. Control modes: Semi-automatic operation (start / stop position of the saw bow is controlled by the Keyboard programmed. Vice closes / opens automatically, saw bow is automatically returned to the beginning of the cut) -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Control panel on vertical post, swiveling, contains all operating elements -Control with soft-touch keyboard, backlit display for display all machine parameters and messages in plain text: Number of cuts (piece counter) + cutting time + power consumption of the Saw band motor + saw band tension in kg (minimum band tension = 900 kg) + Saw frame position (Y-axis) / alarms / faults (description and causes) + Diagnosis… -Saw band tension with band tension control and indication on the display by means of electronic converter -Underframe with lockable door and removable coolant tray, electric coolant pump. -Vise with quick adjustment -Schipping brush for cleaning the saw band -Machine is prepared for all options (see price list). (Electric wire, Software etc.)

Lagernummer:
1125-5282
cutting diameter:
250 mm
saw band length:
2950 mm
table height:
-- mm
:
280 mm
BERG & SCHMID GBS 305 AutoCut, Metal Processing, Saws, Band Saw

BERG & SCHMID

GBS 305 AutoCut

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Lagernummer:
1125-4106
cutting diameter:
280 mm
saw band length:
3370 mm
cutting width:
350 mm
dimensions of saw-band:
3370 x 27 x 0,9 mm
MEP PH 262 HB, Metal Processing, Saws, Band Saw

MEP

PH 262 HB

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Compact, powerful workshop double miter band saw for cuts of 45 ° right to 60 ° left AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and setting of the Cutting pressure via compensating spring Description: -Manual cutting cycle and automatic cutting -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Large turntable for precise miter adjustment -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vise with quick adjustment and quick approach to the material - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Saw band tension with limit switch to check the correct band tension -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band

Lagernummer:
1125-6762
cutting diameter:
225 mm
saw band length:
2450 mm
cutting width:
240 mm
dimensions of saw-band:
2450 x 27 x ,09 mm
BERG & SCHMID GBS 250 SUPER AutoCut, Metal Processing, Saws, Band Saw

BERG & SCHMID

GBS 250 SUPER AutoCut

Kategorie 1:
Metal Processing
Kategorie 2:
Saws
Kategorie 3:
Band Saw

Lagernummer:
1125-4107
cutting diameter:
255 mm
saw band length:
2765 mm
cutting width:
300 mm
work height max.:
940 mm