heavy / thick plate Sheet straightening machine 1 engine 1.5 kW 2 motors 0.75 kW Power main engine 40 CV
Compact, powerful workshop miter band saw machine for cuts from 0 ° to 60 ° left AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring Description: -Manual cutting cycle and automatic cutting -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Saw band tension with limit switch to check the correct band tension -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band
surfacing lathe beszel Multifix blade holder Workpiece weight max. 4000kg
Fully equipped leading and tension spindle lathes. TH 4215 with digital position indicator DPA 21 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Upper slide adjustment range ± 90 ° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in an oil bath - Gears run smoothly, hardened and ground with 2 adjustable ones Precision tapered roller bearings - Handwheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric gradients in the range of 0.2 to 14 mm / rev and all Inch threads in the range of 72 - 2 threads per inch without replacing the Change gears can be set using the switch lever in the control panel - Clockwise / counterclockwise rotation on the bed slide can be switched using the switch spindle - Central lubrication in the bed slide - Base and machine bed made of Meehanite cast in one piece - Lead screw cover - Emergency stop device with foot actuation - Safety handwheels with push-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and handwheel with adjustable fine scale 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, inductively hardened and precision ground Gray cast iron - Coolant device with separate coolant tank with level indicator and Oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip protection Models TH 4210D and TH 4215D with digital position indicator DPA21 - User-friendly membrane keyboard, splash-proof, closed and glare-free - glass rulers scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Live steady rest passage Ø 10 - 75 mm - LED machine light - Reduction sleeve MK 6 / MK 4 - Fixed center point MK 4 - Change gears set - Position stop with fine adjustment - Initial machine filling with quality oil - operating tool ** Including special accessories OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm ** Quick change holder SWH3-E set ** 6x leveling feet SE85 with vibration isolation plate
345/5000 - DONAU DF 130 digital control - digital control panel - Additional extension table, on the side d. M. - autom. Spindle feed - Infinitely variable speed adjustment - central lubrication - coolant device - electr. Height adjustment v. boom - hydr. Clamping of boom - complete documentation - machine vise - electr. Drill spindle protection
Equipment: - For cutting profiles, pipes, solid materials made of iron - and non-ferrous materials - the saw frame can be swiveled up to 60 ° for miter cuts - Infinitely variable lowering via hydraulic lowering cylinder - Torsion-free, strongly dimensioned saw arm made of gray cast iron - 2 Saw band speeds for optimal cutting results (400 V) - robust Construction, therefore quiet and vibration-free running - automatic Limit switch-off according to material average - Robust vice made of gray cast iron with quick lock - ball-bearing saw band guide with quick adjustment to adapt to the workpiece width - guarantees an optimal work result Scope of delivery: - saw band - workpiece stop - underframe - manometer for Belt tensioning - Vice with quick lock - Coolant device - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch - Operating instructions in German - Chip clearing brush (Art-No: 04-1696)
Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Manual cutting cycle AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring Stable, torsion-resistant and low-vibration saw frame made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and inside Table clamp for intermediate angles Vice with quick adjustment Carbide band guides for maximum cutting precision Large deflection discs, adjustable, made of cast steel Hydraulic unit for the saw band tension and monitoring with display Manometer (belt tension = 900 kg) Clear switchboard with all controls Underframe with lockable door and removable coolant tray, electric coolant pump Chip removal brush for cleaning the saw band
Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt
- Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system --------------------------------------- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media --------------------------------------- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ------------------------ The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.
Engine: Spindle drive motor: 29 kW Feed drive motor Y-axis: 20 Nm, X- and Z-axis: 27 Nm Hydraulic motor: 2.2 kW Coolant pump motor: 0.50 kW Lubrication pump motor: 0.09 kW - Tool changer
technical features - Powerful three-phase induction motor with 2 speeds and Gearbox with oil bath - Saw arch, vice and swivel group made of cast steel - Steel saw band guide with ball bearings - Vice with quick release - Front integrated lever for locking the miter adjustment - Coolant pump with aluminum body - Large handwheel for easy saw band tension - Pressure gauge to display the belt tension (600-1000 kg / cm3) STANDARD EQUIPMENT - Mountable base cabinet - coolant tank - Electric coolant pump - Length stop for series cuts - Tools for changing belts and for adjustments - Chip removal brush - Hydraulic cylinder with feed control
Furnishing: - Resonator Ytterbium YLS 4000 compact - Beckhoff controller - Precitec ProCutter Automatic cutting head - autom. Lubrication system - CAD / CAM software LANTEK EXPERT CUT - 17 "touchscreen, keyboard, control panel - Collective conveyor under the cutting table - additional loading unit Cutting capacities: - normal steel 25 mm - stainless steel 15 mm - aluminum 12 mm - brass 8 mm - copper 8 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - max.axis speed: 100 m / min (simulated) - Axis speed X / Y: 100 m / min (single) - Positioning accuracy: + - 0.03 mm / min - Burning height: 125 - 200 mm Loading table: - Number of pieces 2 (35 seconds for changing) - automatic change of tables - max.load 2,500 kg. assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminum - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system - Sick light barrier safety device - Spare part basic supply package Why Fibermak? - Up to 3 times faster cutting compared to other laser technologies - Machines for cutting thin sheets - axes equipped with linear motors / Servo motors reach up to 141 m / min. - Accelerations up to 2G - Fiber laser is the green laser technology (Saving of at least 50% energy costs) - There is no need for laser gas mixing - There is no need for optical Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - Extended options: cutting from reflective materials like aluminum, copper, brass etc., - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, equipped with world-famous, durable, high-quality components - ERMAK passes the price advantage on to its customers thanks to its fast and high quality production - Creative design, constant, highest technology and quality - High reliability - High efficiency - High quality - CE declaration
Furnishing: - MOMENTUM GEN - 2 fiber laser cutting machines 3,000 x 1,500 mm - Ytterbium YLS 4000 compact resonator (4 kW) - PRECITEC PROCUTTER laser cutting head - CAD / CAM software BECKHOFF - Controller CP 6242 - 17 "touchscreen, keyboard, control panel, alphanumeric keyboard - Collective conveyor under the cutting table - additional loading unit Cutting capacities: - normal steel ... 20 mm - stainless steel ... 12 mm - aluminum ... 10 mm - brass ... 6.0 mm - Copper ... 5.0 mm Workspace: - max .: 3,000 x 1,500 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - max.axis speed: 100 m / min (simulated) - Axis speed X / Y: 100 m / min (single) - Positioning accuracy: + - 0.03 mm / min - Burning height: 125 - 200 mm Loading table: - Number of pieces 2 (35 seconds for changing) - automatic change of tables assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminum - compressed air or nitrogen (0.5 - 25 bar) included : - Compatible suction system - Light barrier safety device - Spare part basic supply package Why Fibermak / Fiberlaser? - Up to 3 times faster cutting compared to other laser technologies - Machines for cutting thin sheets - Axis speed: reach up to 141 m / min. - Accelerations up to 2G - Fiber laser is the green laser technology - Saving of at least 50% energy costs) - There is no need for laser gas mixing - There is no need for optical components - therefore, among other things, very low-maintenance - Save up to 50% per part through more efficient production - Extended options: cutting reflective materials * like aluminum, copper, brass etc., - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Creative design, constant, highest technology and quality - High reliability - High efficiency - High quality - CE declaration
- hydraulic workshop press - table height adjustment - V-block tool insert - pressure display manometer
The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.
- Electropneumatic - Semi-automatic vertical circular saw - with microprocessor control - for miter cuts from 60° left to 45° right - Saw head slides on ball recirculating linear dual guides - Three-speed gearbox - Stepless speeds 15-150 rpm - Vise opening 190 mm - The stroke of the saw head can be programmed directly from the control panel - Pneumatic vertical vise - Vice with counter-clamping device for double workpiece clamping - Underframe with removable coolant tray - Chip removal brush
including various rollers
HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke increased projection -------------------------------------------------- ------- Furnishing: - DELEM CNC control model DA 66T - swiveling touch screen control unit - 7 controlled axes : Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split deer foot upper tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH/HOERBIGER hydr. components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (incl. FPSC) - 2 front support arms with SLIDING system (slide bearing) - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes Special equipment included: - electric central lubrication
Max. Sheet thickness stainless steel: 12mm Cut gap adjustment: 0-16 mm - Machine has a back gauge adjustable from the front. - cut line lighting
The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money
Electro-hydraulic automatic miter band saw for cuts from 0 ° to 60 ° left -new, innovative (Windows CE based) touch screen control -Cutting area around max. 280 mm (solid material) - Required space only 3.42 square meters New version: now with anti-vibration rollers and an even more powerful gear size 75 and considerably reinforced cast steel saw frame - Semi-automatic operation (start / stop position of the saw bow is programmed via the keyboard. Vice closes / opens automatically, The saw arch is automatically returned to the start of the cut) - Fully automatic operation (10 programs, each with different Quantity (max. 9999) and length (max. 9999.9 mm) with an accuracy of ± 0.1 / 600 mm. Execution of up to 10 combined programs in one cycle. Three different cutting cycles can be selected - Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision - Large-sized deflection discs, adjustable made of cast steel with integrated belt circulation control - Dynamic cutting pressure control (variably programmable, control via Stepper motor due to the torque monitoring of the belt drive) - Precise adjustment of the cutting feed with information in mm / min. - Frequency converter for stepless drive of the tool - X-axis (material feed) via recirculating ball spindle with at least remaining piece 210 mm - Control (Windows CE based) with 7 "touch screen and additional soft- Buttons, backlit display to show all Machine parameters and messages in plain text: Number of cuts (programmed / executed) / cutting speed / lowering speed / preselectable Cutting pressure (in amps) / cutting time / power consumption of the saw band motor / Saw band tension in kg (minimum band tension = 900 kg) / saw frame position (Y- Axis) / feeder position (X-axis) / alarms / faults (description and Causes) / diagnostics ... - Saw band tension with band tension control and indication on the display by means of electronic converter - Base with door - Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for Chip removal from the work area, removable coolant tray 100 liters - Coolant gun for cleaning the machine - Vice with quick adjustment and exchangeable clamping and Stop jaws - Chip removal brush for cleaning the saw band
Shaft diameter 20 mm (standard) Max. Bending radius 60 mm Max. Bending capacity steel 12 x 1.5 Stainless steel 12 x 1 Copper soft 16 x 1 Length feed (accuracy): with electrical drive 0.1 mm Rotation (accuracy): with electrical drive 0.1 ° Three-jaw chuck: Yes Voltage NC 2 / NC 3: 230V / 400V
Soundproof screw compressor with electronic control - refurbished -
Rated power ( 50% ED ) : 63 kVA Continuous power : 44.5 kVA Maximum short-circuit power : 228 kVA Maximum welding power : 182 kVA Arm distance min. / max. : 60 / 230 mm Electrode arm Ø : 60 mm Electrode holder Ø : 25 mm Projection : 600 mm Machine weight: approx. 330 kg Dimensions : 1300 x 600 x 1600 mm incl. foot switch
- 2x bending aid - lower and upper tool as per photo - Underprotection
- 5 workstations - with 1 foot trigger - hydraulic drive - table at the - Stamping station and notching station - Operating manual
Condition New - 3 motor driven rollers - hydr. Infeed of the front roller - swiveling control panel with digital actual value display New price approx .: 168,500.00
- automatic overload protection - external operating unit (Manual Pulse Coder) - direct threading - Spindle oil cooling unit - Spindle ampere meter - Pallet magazine with 2 pallets 630 x 630 mm, integrated blower during the change, pallet loading station - Pallet rotary table with 1 ° resolution - Coolant full protection cabin with autom. Pallet door according to CE / EMC - Oil separator - Built-in spiral conveyor (both sides) with chip basket - Coolant system with pump and supply hoses - separate lubricating oil device (central lubrication) - Blowing device for the machine spindle - Engine room light - 2 warning lights (cycle end and alarm lamp) - Transformer - HEIDENHAIN control iTNC 530 (15 "color screen) - HEINDENHAIN Handwheel HR410 - IKZ - Internal coolant supply through the spindle (60bar with Mahle single filter and Brinkmann pump BS-348-60) - Workpiece measurement system with RENISHAW MP-10 probe - Chip conveyor with cart - magnetic chucks HD 75 (600x 400 mm 2 pieces) - 3 axes + 4th axis with 1 degree indexing - flatbed guide - Tool package - Documentation
max.area performance: 1,800 m2 / h (depending on the degree of soiling) Axle suspension: Axle adjustment adjustable in height depending on the wear and tear of the Wire braids Wheels: foamed with polyurethane (with deep groove ball bearings) three rotating brush holders and the resulting even one Ground pressure prevent scratching the subsurface Plants are attacked from all sides and with a large proportion of roots away Durable, adjustable wire braids that can be easily exchanged Height-adjustable wheel suspension adapts to the length of the bristles Thanks to the built-in planetary gear, the WKB 660 Honda has three individually in rotating brush holders. This enables an even ground pressure, scratched surfaces are a thing of the past.
Manual metal circular saw MKS 315 N Action set / Item no. 3620303SET - two cutting speeds - Rotatable machine head 45° to the left and 45° to the right - Reduction gear, running quietly in an oil bath - automatic diaphragm coolant pump with coolant filter - Vice with counter vice, quick release and anti-burr jaws guarantees a precise and burr-free cut - Lateral material support arm with roller - Vice swivels 45° to the left and 45° to the right - Movable guard ensures optimal safety when cutting - Control handle with safety switch - Vice with counter vice, quick release and anti-burr jaws - Lateral material support arm with roller - Vise can be moved longitudinally and thus for longitudinal cuts and for suitable for slots 0° (round) solid material 55 mm 0° (round) tube 90 mm 0° (square) tube 80 x 80 mm 0° (rectangular) tube 115 x 70 mm -45° (round) solid material 50 mm -45° (round) tube 80 mm -45° (square) tube 70 x 70 mm -45° (rectangular) tube 70 x 70 mm +45° (round) solid material 50 mm +45° (round) tube 80 mm +45° (square) tube 70 x 70 mm +45° (rectangular) tube 70 x 70 mm
Heavy-duty trailer - industrial trailer - Available immediately from stock Frame: - Frame made of stable profile steel - Platform made of impregnated softwood - Protected all around with a steel edge, statically designed - 6 lashing rings welded on Steering: - The steering takes place via 2 axles with Ackermann steering - the steering drawbar is removable and can be hooked in on both sides - Steering angle approx. 42° - all rotating parts are with maintenance-free slide bearings (lubricated for life) Equipped with ball bearings - Towing eye: 40 mm Ø with wear ring - Fork support height adjustment for better coupling to the towing vehicle Wheels - the trailer is equipped with 4 heavy-duty wheels with elastic rubber covering Ø425mm, total width 300mm and ball bearings.
- 2 column guided - incl. 5 band saw bands 4-6 ZpZ - chip conveyor
- with chips clearing - chip conveyors - driven roller conveyor 3000mm - 1200mm roller conveyor - material stress - roles infeed or discharge tables
Pull studs DIN69872-B | IKZ Hours: Control on: 43036 h Machine on: 41311 h Program run 13894 h The machine is already dismantled
- Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation - Electronic control integrated in the drill head - integrated coolant system - Machine light - height-adjustable chip protection disc with micro switch - fixed table - CE marking
- The round table comes from an exhibition and is new!
Compact, powerful workshop miter band saw machine for cuts from 0 ° to 60 ° left Automatic cut (HB) and manual cut Description: -Manual cutting cycle and automatic cutting -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Saw band tension with limit switch to check the correct band tension -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -päneräumb Brush for cleaning the saw band
Rated power ( 50% ED ) : 50 kVA Continuous power : 35.4 kVA Maximum short circuit power : 163 kVA High welding power : 130 kVA Arm distance min. / max. : 60 / 230 mm Electrode arm Ø : 45 mm Electrode holder Ø : 25 mm Outreach : 610 mm Machine weight: approx. 285 kg Dimensions : 1200 x 700 x 1450 mm incl. foot switch
Drilling and tapping machine on base with splash guard cabin, screen control for x + y travel range, digital depth and speed display with programmable drilling depths. Working possibilities: Drilling with automatic feed, drilling with manual feed, cutting threads, milling is not possible. Electric 380 volt Coolant system hydr. jig Zu- u. Discharge roller track 500 x 10,000 mm
Powerful miter band saw for cuts from 45 ° right to 60 ° left Electro-hydraulic CNC machine with Windows CE based touch screen control -Automatic cycle (cuts from 0 ° to 60 ° left) -Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right to 60 ° left). -Manual or semi-automatic dynamic cycle to make cuts outside of series production directly without programming. -Numerically controlled band saw machines with the new Windows CE based control, specially developed by MEP for automatic machines. FEATURES: -User interface with 7 touch screen display and mechanical keys for the operating functions of the sawing machine, guarantees reliable operation, simple and intuitive, and real-time control of all cutting parameters. - Protective housing for the safety of the worker -The control console on a swiveling arm enables comfortable and safe operation from any position. -Display and entry of alarm and error messages with the option of displaying incidents that have occurred. - Infinitely variable regulation of the cutting speed from 15 to 100 m / min via frequency converter (inverter). -The latest generation of hydraulic power pack, extremely powerful with low energy consumption. -Material feed with stepper motor via ball screw mounted on opposing ball bearings; 600 mm repeatable single stroke to saw any length. -Positioning of the saw head and movement of the feeder using a joystick. -Automatic detection of the cutting start position. -Hand-operated strap tension control with indication on the display by means of an electronic converter. -Automatic monitoring of the cutting load through a servo valve mounted directly on the cylinder. -The coolant pan (equipped with 2 electric pumps for lubrication and cooling of the saw band) is built into the underframe -The chip drawer can be replaced by a motorized chip conveyor - see special accessories. -Preparation for the installation of the OPTIONAL minimum quantity lubrication system in addition to the conventional standard lubrication with emulsion oil. -Schipping brush. -Bimetal saw band for solid and profile material. -Tool and instructions for use with list of spare parts.
Siegmund Workstation incl. 4 drawers + tool set B With the new workstation from Siegmund you can create your own optimal workplace in the modular system. The Siegmund Adapt and expand the workstation to your needs and wishes. Regardless of whether sawing, drilling or welding - the absolute all-rounder in every workshop! Consisting of: 1x 004002 (Siegmund Workstation) 1x 164004.X07 (perforated plate) 1x 164030 (clamp holder) 1x 004020 (shelf) 1x 164035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 3x 004230.WS (drawer) 1x 004235.WS (drawer) 4x 160620 (clamp) 8x 160511 (double quick release bolts without groove) 6x 160412 (stop) 2x 160108.N (angle) 1x 160852 (Allen key) 1x 164301 (vice) Perforated plate: through hardened tool steel Hole Ø 16 mm Holes surface 50x50 mm grid Material thickness approx. 11.5 - 13 mm
Powerful miter band saw for cuts from 60 ° right to 60 ° Left With saw band 34 x 1.1 mm (5.5 kW frequency converter, 4 kW belt drive motor) Electro-hydraulic semi-automatic machine with microprocessor control Functionality: -Semi-automatic operation (start / stop position of the saw bow is controlled via the Keyboard programmed. Vice closes / opens automatically, saw bow is automatically returned to the beginning of the cut) Features: -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision. Front, adjustable Tape guide holder on linear guides for easy, fast and accurate Adjustment for the cutting area -Large dimensioned deflection discs, adjustable made of cast steel -Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with precision stops at 0 ° / 45 ° / 60 ° and Table clamp for intermediate angles -Control panel, swiveling, contains all operating elements -Control with soft-touch keyboard, backlit display for display all machine parameters and messages in plain text, including: -Number of cuts (piece counter), cutting time, power consumption of the Saw band motor, saw band tension in kg (minimum band tension = 900 kg), Saw frame position (Y-axis), alarms / faults (description and causes), Diagnosis -Saw band tension with band tension control and indication on the display by means of electronic converter -Frequency converter for stepless drive of the tool -Underframe with lockable door -Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for Removal of chips from the work area -Coolant gun to clean the machine -Vise with quick adjustment and exchangeable clamping and Stop jaws, lateral adjustment on linear guides - Chip removal brush, driven, for cleaning the saw band -Machine is prepared for all options (see price list). (Electric wire, Software etc.) Standard equipment: -Bi-metal saw band -Adjustable length stop 600 mm with millimeter scale Tool kit -Detailed operating instructions, maintenance manual, circuit diagrams and Exploded view -Adapter for supply roller conveyor incl. 1 support roller - Entry option for forklift / pallet truck transport
Sanders item no. S948928004643 Perfect welded constructions thanks to pre-tensioning before welding. The bench press is used to straighten deformed steel products. With a pressing force of 2.5 tons, parts with unwanted unevenness or tension in the material can be straightened. With the additionally available pipe bending punch, pipes with a diameter of up to 42 mm can be bent flexibly. The total stroke is 60 mm, which can be achieved with 13 pump strokes with an operating force of approx. 330 N (stroke per pump stroke 4.6 mm). An overflow valve prevents further pressure build-up when the piston rod is fully extended. For secure attachment to the table, the table press can be fixed through the turret head either with quick-release bolts or with the attached bolt. The table press must always be fixed in two places. - for clamping and straightening
Bench drilling machine SOLID TB16 S on desk stand Infinitely variable speeds from 250 to 3950 rpm Drilling table 350 x 560 mm Column diameter 90 mm Machine height with desk stand 1750 mm included: - underframe - drill chucks - EMERGENCY STOP SWITCH - Chuck protection
Manual folding machine FSBM 1020-20 HSG / 3770103 - The workpiece is clamped using a foot pedal, so both hands remain free for material feed - Different tool variants available E, S2, HS2 and HSG - The strong auxiliary cylinder makes bending easier - Wide clearance between the upper and lower beam of up to 25 mm - Self-lubricating slide bearings - Clamping pressure of the upper beam can be easily adjusted using handy knurled screws - Adjustment of the material thickness by means of a knurled screw - Adjustable stop for bending angle Equipment details: FSBM 1020-20 HSG - With segmented goat foot tools, segmented bending bar and segmented bed pad - Segments have a hardness of HRC24-26 VA steel 1.2 mm Aluminum 2.4 mm
BT TYRO pallet truck Tires: steering wheels polyurethane, fork rollers polyurethane tandem - electrical lifting and lowering of loads - up to 4.8 km / h - Speed reduction when cornering - Easy charging of the Li-Ion battery - 12A charger enables recharging within 2.5 hours
- Sensitive lowering possible - Angled, durable polymer handle - 12 grease nipples ensure easy maintenance and a long service life - The BT lowering control (BLC valve) enables controlled and gentle lowering the burden
- manual asymmetrical 3-roll round bending machine with hand drive - manual folding warehouse - manual delivery d. rear roller - profile grooves: 4/6/10 mm
The Professional 750 4-280040.PD 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X
The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X
Stationary piston compressor with refrigeration dryer, fine filter, Condensate conditioner for oil-water separation and automatic condensate drain
The table Professional Extreme Article no. 4-280040.XD7 3000x1500x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X
consisting of: 10x screw clamp standard 280610.N 6x screw clamp 45 ° / 90 ° 280630.N 4x prism Ø 50 mm 280648.1.N 24x quick release bolts 280511 4x magnetic clamping bolts 280740 8x universal stop 150 L 280410.N 8x universal stop 225 L 280420.N 6x stop and clamping angle 175 L 280110.N 2x stop and clamping angle 300 G 280152.N 2x stop and clamping angle 500 G 280162.N 1x angle 280166 + 67.N 1x accessory set 283999
The table Professional 750 Article no. 4-280030.P 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. including 4x feet Basic equipment 650 Article no. 280858.X
Item no .: 2-280910 / Sanders Artnr. S9489280910 Length 650 mm x width 900 mm x height 1020 mm Weight 50 kg The tool trolley offers enough space for your Siegmund accessories. You always have an overview and the entire tool is quickly at hand. Large corners are conveniently and safely stowed in the interior. Thanks to the rollers, the tool is quickly where you need it. - powder coated - Permissible total weight 240 kg
The table Professional 750 Article no. 4-280030.PD 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X
consisting of: 14 pieces professional screw clamp 10 pieces Professional screw clamp 45 ° / 90 ° 8 pieces Vario prism Ø 50 135 ° 36 quick release bolts without groove, double 8 magnetic clamping bolts 60 12 pieces universal stop 150 L 12 pieces universal stop 225 L 4 pieces universal stop 500 S 12 stop and clamping angles 175 L 2 stop and clamping angles 300 G 2 pieces of stop and clamping angle 500 G 1 stop and clamping bracket 500 G with 1 stop and clamping bracket 500 G with 1 piece stop and clamping bracket 750 G left 1 piece stop and clamping bracket 750 G right 1 piece stop and clamping bracket 800 GK left 1 piece stop and clamping bracket 800 GK right 1 piece tool trolley
consisting of: 14 pieces Professional screw clamp 280610.N 10 pieces Professional screw clamp 280630.N 6 pieces Vario prism Ø 50 135 ° 280648.1.N 30 quick release bolts 280511 8 magnetic clamping bolts 60 280 740 10 pieces universal stop 150 L 280410.N 10 pieces universal stop 225 L 280420.N 4 pieces universal stop 500 S 280430.N 8 stop and clamping angles 175 L 280110.N 2 stop and clamping angles 300 G 280152.N 2 stop and clamping angles 500 G 280162.N 1 piece stop and clamping angle 500 G with angle of rotation left 280164.N 1 piece stop and clamping bracket 500 G with right rotation bracket 280165.N 1 piece stop and clamping bracket 750 G left 280166.N 1 piece stop and clamping bracket 750 G right 280167.N 1 piece tool trolley 280910
The table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X
The Professional Extreme table Article no. 4-280030.XD7 has 2400x1200x200 mm a diagonal arrangement of holes on the table top and a parallel one Hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm and the table one Material thickness of approx. 24.5-27 mm. The table top is made of hardened Tool steel manufactured. The little stressed side walls are still off for reasons of cost Steel S355J2 + N made. Grid lines at a distance of 100 mm make it easier for you the structure of your device. The welding tables are provided with a scale as standard. Including 4x feet, basic equipment 650 Article no. 280858.X
Bench drill / 3020625TSET - Heavy execution of the whole machine - Very smooth running thanks to the new spindle design - industrial engine - Separate emergency stop impact switch - drilling depth stop - LED machine light integrated in the drill head - Precisely machined, stable drilling table with diagonal T-slots with a circumferential cooling water channel - Drilling table can be tilted ± 45 ° and rotated 360 ° - V-belt cover with safety switch - Precision spindle bore - Machine operation of safety electronics in 24 V DC voltage - Guaranteed concentricity = 0.02 mm measured in the drilling spindle - Thick-walled steel column for high force absorption and stability - Solid, large base plate with T-slots scope of delivery - Keyless chuck 0 - 16 mm - T-nuts - Expeller - Adapter MK 3-B16 - operating tool - BMP 100 machine vice
Fully equipped leading and tension spindle lathes. TH 3309D with digital position indicator DPA 21/3402040 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 4 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Main spindle running in an oil bath - Gear wheels run smoothly, hardened and ground - Upper slide adjustment range ± 90 ° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Handwheels decoupled and tested according to EN 23125 - Safety handwheels with push-out function in the X and Z axes - Two-channel right-left switch tested according to EN 23125 - DC 24 volt electrical system with two-channel safety circuit according to EN 23125 - Lathe chuck protection tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - Lockable main switch - Clockwise / counterclockwise rotation on the bed slide switchable - Lead screw cover - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and handwheel with adjustable fine scale 0.02 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, inductively hardened and precision ground - Machine base with tool compartment on the right-hand side (left-hand side with 3 Bezels (no compartments) - Pull-out chip tray with guide rails - Emergency stop device with foot actuation - LED machine lamp integrated in the chip guard Digital position indicator DPA 21 - User-friendly membrane keyboard, splash-proof, closed and glare-free - glass rulers scope of delivery - Fixed steady rest passage Ø 6 - Ø 50 mm - Moving steady rest passage Ø 8 - Ø 30 mm - LED machine light - Reduction sleeve MK 5 / MK 3 - Two fixed centering points MK 3 - Quadruple steel holder 16 mm - Change gears set - machine base - Initial machine filling with quality oil - operating tool ** Including special accessories OPTIMUM three-jaw lathe chuck, centric clamping Ø 200 mm Camlock DIN ISO 702-2 No. 4/3442762
with manual angle adjustment / 1541350 - For quick and easy welding from all sides - Easy handling - Infinitely variable speed of the plate with right / left rotation - Control electronics protected by a robust and closed housing - Foot switch for start / stop
- hydraulic horizontal bending machine - Solid work surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - stepless adjustment of speed / pressing force - Double foot switch
- Exhibition machine - - Most compact ride-on scrubber-dryer from DiBO with 2 brushes - Possibility to dispense detergent: in ECO mode with constant Saving or automatic regulation of the machine depending on the speed of the machine Brush motors and suction: even less energy consumption, even more Smoothness - Display: large, multilingual, including hour counter, battery level and work programs - Memory card: allows the storage of battery charge cycles and Power consumption of the motor - CFS system: water distribution from the middle of the brush to avoid waste Avoid cleaning solution - SLS system: self-leveling electronic system to keep the brush always lies perfectly on the floor - EDD system: suction cup for the best results during drying and during Area performance was developed - Wheels: oil resistant - Extraction: 2 levels with fans and stainless steel shaft
Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and shutdown at the end of the cut) New version: now with anti-vibration rollers and an even more powerful gear size 75 and considerably reinforced cast steel saw frame Description: CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and shutdown at the end of the cut) Either automatic or manual cutting cycle Stable, torsion-resistant and low-vibration saw frame made of cast steel Carbide band guides for maximum cutting precision Large deflection discs, adjustable, made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and internal Table clamp for intermediate angles. Interchangeable material supports made of steel Control panel on vertical post, swiveling, contains all control elements Saw band tension with band tension control and indication on the display by means of electronic converter Base with lockable door Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for Chip removal from the work area Coolant gun for cleaning the machine Vice with quick adjustment and interchangeable clamping and Stop jaws Chip removal brush for cleaning the saw band Machine is prepared for all options (see price list). (Electric wire, Software etc.) Standard equipment: Bi-metal saw band Adjustable length stop 600 mm with millimeter scale Tool kit Detailed operating instructions, maintenance manual, circuit diagrams and Exploded view Attachment adapter for supply roller conveyor including 1 support roller Entry possibility for forklifts / pallet trucks
Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Manual cutting cycle AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring Stable, torsion-resistant and low-vibration saw frame made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and inside Table clamp for intermediate angles Vice with quick adjustment Carbide band guides for maximum cutting precision Large deflection discs, adjustable, made of cast steel Hydraulic unit for the saw band tension and monitoring with display Manometer (belt tension = 900 kg) Clear switchboard with all controls Underframe with lockable door and removable coolant tray, electric coolant pump Chip removal brush for cleaning the saw band
- motor-driven asymmetrical 3-roll round bending machine - hardened rollers - manual folding warehouse for quick removal of the workpiece - Profile inlets i.d. Rollers - Double foot switch for R / L run and emergency stop button - Conical bending device - rear roller manually adjustable - electr. Security device
- hinged bottom container -
- hinged bottom container -
- motor-driven asymmetrical 3-roll round bending machine - hardened rollers - manual folding warehouse for quick removal of the workpiece - Profile inlets i.d. Rollers - Double foot switch for R / L run and emergency stop button - rear roller manually adjustable - electr. Security device - Profile grooves: 4/6/10 mm
Furnishing: - manual asymmetrical 3-roll round bending machine with hand drive - manual folding warehouse - manual delivery d. rear roller - Profile grooves: 4/6/9 mm
- manual asymmetrical 3-roll round bending machine with hand drive - manual olding warehouse - manual delivery d. rear roller
EQUIPMENT: Fanuc 0i-TC control including manual guide 10.4 inch color display Fanuc main spindle and axis motors High-precision 12-position bloc-holder turret with direct holder Toolholder package Hydraulic hollow clamping device with 3-jaw power chuck Cooling lubricant system Automatic chuck activity OPEN-CLOSE Hydraulic unit Electronic axis supervision
Control modes: -Manual mode -Semi-automatic-dynamic operation (the semi-automatic cut is started by manually approaching the saw bow from any position by actuating the hand switch) -Semi-automatic operation (start / stop position of the saw bow is programmed via the keyboard, vice closes / opens automatically, saw bow is automatically returned to the start of the cut) Features: -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Large, easily adjustable and mounted turntable, turntable centered by central axis bolts with indexing at 0 ° / 45 ° / 60 ° and internal table clamp for intermediate angles. Interchangeable material supports made of steel -Control panel on vertical post, swiveling, contains all operating elements -Control with soft-touch keyboard, backlit display for displaying all machine parameters and messages in plain text, including: -Number of cuts (piece counter), cutting time, power consumption of the saw band motor, saw band tension in kg (minimum band tension = 900 kg), saw frame position (Y-axis), alarms / faults (description and causes), diagnostics ... -Saw band tension with band tension control and indication on the display by means of an electronic converter -Underframe with lockable door -Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for removing chips from the work area -Coolant gun to clean the machine -Vise with quick adjustment and exchangeable clamping and stop jaws -Schipping brush for cleaning the saw band -Machine is prepared for all options (see price list). (Cables, software etc.) Standard equipment: -Bi-metal saw band -Adjustable length stop 600 mm Tool kit -Detailed operating instructions, maintenance manual, circuit diagrams and exploded views -Adapter for supply roller conveyor incl. 1 support roller - Entry option for forklift / pallet truck transport
The self-adjusting D-HGZ roller blocks adapt to the different Diameters of your workpieces yourself. This roller block is for special designed for heavy-duty activities. Furthermore, this roller block is for Suitable for thin-walled workpieces, as the four wheels per unit are an improved Supply pressure distribution. || Features: | - Electronic components of Top quality | - Infinitely adjustable speed of the drive unit | - Wheels fitted with solid rubber tires enclosed in one Steel construction | - Heavy construction enables very high stability. | - Favorable price-performance ratio enables quick recovery Your investment. | - The D-HGZ series is supplied as a standard version and includes a remote control with digital reading. || Accessories: | - double Foot pedal (start-stop / left-right) | - remote control
Control: 2D graphic control DNC 84 PS Max. Distance between machine table and pressure beam: 500 mm Connection values: Main drive power 22 kW Operating voltage 3x400 V / N / PE / 50Hz max.back-up fuse 80 A Weights: Table approx. 6100 kg Ram approx. 6200 kg Frame approx. 8200 kg Total approx. 21,000 kg
Powerful miter band saw for cuts from 45 ° right to 60 ° Left Electro-hydraulic semi-automatic machine with microprocessor control New version: now with anti-vibration rollers and an even more powerful gear size 75 and considerably reinforced cast steel saw frame Control modes: Manual mode Semi-automatic dynamic operation (The semi-automatic cut is made by manual approach of the saw bow from any position via actuation of the handset started) Semi-automatic operation (start / stop position of the saw bow is controlled by the Keyboard programmed Vice closes / opens automatically, the saw curve becomes the start of the cut automatically returned) Description: Stable, torsion-resistant and low-vibration saw frame made of cast steel Carbide band guides for maximum cutting precision Large deflection discs, adjustable, made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and internal Table clamp for intermediate angles. Interchangeable material supports made of steel Control panel on vertical post, swiveling, contains all control elements Control with soft-touch keyboard, backlit display for display all machine parameters and messages in plain text, including: Number of cuts (piece counter), cutting time, power consumption of the Saw band motor, saw band tension in kg (minimum band tension = 900 kg), Saw frame position (Y-axis), alarms / faults (description and causes), Diagnosis Saw band tension with band tension control and indication on the display by means of electronic converter Base with lockable door Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for Chip removal from the work area Coolant gun for cleaning the machine Vice with quick adjustment and interchangeable clamping and Stop jaws Chip removal brush for cleaning the saw band Machine is prepared for all options (see price list). (Electric wire, Software etc.) Standard equipment: Bi-metal saw band Adjustable length stop 600 mm Tool kit Detailed operating instructions, maintenance manual, circuit diagrams and Exploded view Attachment adapter for supply roller conveyor including 1 support roller Entry possibility for forklifts / pallet trucks
Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Hydraulic unit for the saw band tension and monitoring with display on Manometer (belt tension = 900 kg) -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band
Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized tape oscillation approx. 10mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley
powerful, electro-hydraulic, semi-automatic band saw machine for Miter cuts from 0 ° to 60 ° left. Control modes: Semi-automatic operation (start / stop position of the saw bow is controlled by the Keyboard programmed. Vice closes / opens automatically, saw bow is automatically returned to the beginning of the cut) -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Control panel on vertical post, swiveling, contains all operating elements -Control with soft-touch keyboard, backlit display for display all machine parameters and messages in plain text: Number of cuts (piece counter) + cutting time + power consumption of the Saw band motor + saw band tension in kg (minimum band tension = 900 kg) + Saw frame position (Y-axis) / alarms / faults (description and causes) + Diagnosis -Saw band tension with band tension control and indication on the display by means of electronic converter -Underframe with lockable door and removable coolant tray, electric coolant pump. -Vise with quick adjustment -Schipping brush for cleaning the saw band -Machine is prepared for all options (see price list). (Electric wire, Software etc.)
The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.
consisting of: 30x article no. 2-280510 Quick release pin short - Clamping of 2 components - burnished - with twist lock 8x article no. 2-280410.N Universal stop 150 L - nitrided - nitrided - as standard with fine scaling on both sides 4x article no. 2-280420.N Universal stop 225 L - nitrided - nitrided - as standard with fine scaling on both sides 8x article no. 2-280110.G Stop and clamping angle 175 L - cast / black oxide finish - Hole / elongated hole - Cast / burnished 2x article no. 2-280162.N Stop and clamping angle 500 G - nitrided - Left stop - nitrided 1x article no. 2-280166.N Stop and clamping angle 750 G left - nitrided - Left stop - nitrided 1x article no. 2-280167.N Stop and clamping angle 750 G right - nitrided - stop on the right - nitrided 1x article no. 2-280910 Tool trolley - painted - Permissible total weight 240 kg 1x article no. 2-280164.N Stop and clamping angle 500 G with turning angle left - Left stop 1x article no. 2-280165.N Stop and clamping angle 500 G with right angle of rotation - stop on the right - Cast / nitrided 4x article no. 2-280152.N Stop and clamping angle 300 G - nitrided - Left stop - nitrided 8x article no. 2-280651.1. Prism Ø 60 135 ° with screwed-in collar - aluminum - aluminum - M16 thread for e.g. B. Prism Extension Item No. 280649 16x article no. 2-280610.N Professional screw clamp - nitrided - nitrided 6x article no. 2-280630.N Professional screw clamp 45 ° / 90 ° - nitrided - nitrided 4x article no. 2-280426.N Universal stop 300 - nitrided - 3 system holes - nitrided
Incl. double foot pedal (start-stop / left-right) Incl. remote control (on the cable)
Welding table with hollow shaft D-DWP Tilt and turn tables with bore for turning, tilting and welding small workpieces from 100 kg. - Rotation and tilt axis - Infinitely variable speed - Compact model - Incl. Foot pedal
consisting of: 4x clamp 280610.N 2x clamp 280630.N 2x prism 280648.1.N 12x bolts 280511 4x stop 280410.N 4x stop 280420.N 2x angle 280110.N 2x angle 280152.N 1x accessory set 283999
- The control of the machine has been completely overhauled!
consisting of: 6x clamp 280610.N 4x clamp 280630.N 4x prism 280648.1.N 18x bolts 280511 4x magnetic bolts 280740 6x stop 280410.N 6x stop 280420.N 4x angle 280110.N 2x angle 280152.N 2x angle 280162.N 1x accessory set 283999
The PB 50-3 is a profile bending machine with manual adjustment of the top roller via a handwheel. The profile bending machine can be used in vertical and horizontal working position and are equipped with three driven rollers. The change between two or three driven rollers is done simply by the side handle of the machine. - Manual adjustment of the top roller with a handwheel - Vertical and horizontal work possibility - 3 driven rollers - Supplied with a standard roller set - Foot pedal
- Segmented upper and bending beam for a wide variety of bending options - Clamping by means of a foot pedal - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Manual bending machine for standard bending tasks - Quick and easy bending process using a bow handle - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles Furnishing : - Segmented upper cheek - Segmented lower cheek - Foot clamp - Fixed stop angle adjustment
Milling head manually swiveling +/- 90 ° Technical documentation available
- Link-guided series with CNC control D-TOUCH 7 - Monoblock welded steel construction made of high quality steel - CNC-controlled backgauge, with 2 speeds - Via ball screw and linear guides - automatic retraction of the backgauge during the cutting process - The back gauge can be folded up for longer sections - Light barrier protection for rear access to the machine - hydraulically adjustable cutting angle via CNC - Motorized cutting gap adjustment via CNC - variable cutting length adjustment via CNC - High-performance hydraulic cylinder made of SAM 1040 material - Hydraulic piston high quality chrome-plated and finely ground - Automatic adjustment of the blank holder pressure proportional to the sheet thickness - Finest double filter hydraulic system - 25 microns - Cutting line display - laser - divided, foldable finger protection 1,000 mm - easy handling of the sheets via ball transfer units in the table - high quality components - 1x side stop 1,500 mm - 4x support arms 1,000 mm - foot switch - Required instructions ** Special accessories included - Pneumatic sheet metal support for thin sheet metal
- hydraulic 4 roll bending machine - Conical bending device - Induction hardened rollers - Digital display for the two side rollers - mobile control panel - 2 speeds - hydraulic folding bearing - CE mark / declaration of conformity - Required instructions
Particle pre-separator: coarse filter, pre-filter Main particle separator: main filter Gas separator: activated carbon filter Hose arm: joints inside What is the filtoo? The filtoo filter device newly developed by TEKA is a mobile filter system, for many tasks in the area of ??filtration of smoke and dust and gases can be used. The device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class "W3" (degree of separation: 99.9%). at The filtoo is intended to be used for the separation of smoke suitable, which by welding separation and joining processes at the Machining of unalloyed steels, including high-alloy chrome / Nickel steels are released. How does the filtoo work? The Polluted air sucked into the filter system. In a multi-level The filter process filters the particles / gases from the air stream and the clean air is fed back into the work area. Where can the filtoo be used? At welding workplaces, in the workshop area, for soldering applications, at Restorers and locksmiths. What do you get for your money? All you get is a completely ready-to-use "plug and play system" the recording device must be connected before commissioning. How is the filtoo set up? The housing is made of a stable sheet steel construction and is inside as well as provided with a powder coating on the outside. The filter elements are over A maintenance hatch is accessible and can therefore be accessed very easily and quickly can be removed. The system has functional controls.
The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. Operation is via electric foot pedals. The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.
Stacking box SSI Schäfer 14 / 6-3, galvanized steel, used, pictures may differ! - Hot-dip galvanized, steel - Suitable for roller conveyors, stackable **while stocks last. Various boxes in stock - number of items on request!
3.6 tons up to 6 km / h Payload approx. 3000 kg on at least 3/4 of the loading area 4x draw eye Ø 40 mm Fork support height adjustment for better coupling to the towing vehicle Parking brake acting on 2 wheels with shoe brake and brake lever. (For braking the brake lever must be pulled)
Hand pallet truck PHW 2506/6152506 / Sanders item no. S74546152506 Comfortable to use, resilient and manoeuvrable - Lifting, lowering and neutral position can be operated via one-hand lever - Smooth-running hydraulic pump with hard chrome-plated piston and pressure relief valve - The lowering speed is infinitely adjustable via a sensitive drain valve - Easy moving even of heavy loads thanks to the extra-quiet aluminum Swivel castors with solid rubber treads and tandem fork castors made of polyurethane - Robust ball bearings in all wheels and rollers - Steel frame and fork in a very stable and torsion-resistant shell construction - Ergonomically shaped drawbar with a plastic coating on the handle
Small format shelf for sheets of second choice (optical defects, rust spots,etc.) -dismantled- 10 drawers 2200x1050mm Load per drawer: 2,000kg External dimensions 2470 x 2180 x 2170 mm Load space 108mm Open drawer system for storing sheet metal, can be pulled out by hand, stable welded and demountable construction, of which the rails each have to be hooked in, with rollers that are lubricated for life
- hydraulic workshop press with adjustable cylinder - Table height adjustment - V-block tool insert - Pressure gauge
- hydraulic workshop press - Table height adjustment - V-block tool insert - Pressure gauge
Equipment: - hydraulic horizontal bending machine - solid work surface stabilized steel - machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - double foot switch
- Divided upper, lower and rear tool - Upper tool with quick change system - Foot quick clamp - Angle stop - lockable - manual back gauge 500 mm - mobile
- Motorized rear stop 1000 mm, programmable via ENC control 100 - Illumination with cutting line indication by silhouette - Hold-down device close to the cutting edge - divided fold-up finger guard 1000 mm - Self-regulating hold-down pressure - Manual cutting gap adjustment via adjustment lever - Infinitely adjustable cutting length - Rear light barrier - wide sheet metal supports with ball casters - foot switch NC control ENC100 - Storage capacity for 20 cutting sequences can be divided into up to 50 programs - Digital display - Free ride option - Programming in inches and mm ** Including operating instructions, built-in set of knives and separate new one knife set!
- 4 stop fingers - Crowning device - Adjustment of the finger height manually via crank 140 mm - Groove in the front of the table - various tools
Column drilling machine with gear drive and movable table max.drilling capacity for gray cast iron (GG 20) Ø 30 mm max.threading capacity for steel (St 60) M 18 max.threading capacity for gray cast iron (GG 20) M 20 - 8 fixed speeds, mechanically switchable - Scale with adjustable drilling depth - automatic tool ejector - movable work table MF - machine light - EMERGENCY STOP button - Switch for right / left rotation - Chip protection device with microswitch monitoring - thermomagnetic motor protection - Switching electronics in the low-voltage range - Color RAL 7004 (light gray) and RAL 7466 (dark gray) - CE conformity and mark - Documentation, operating and maintenance instructions
Control: -Heidenhain TNC 415 B - incl. NEW 12.1 "TFT LCD industrial monitor Equipment: -Coolant device -automatic lubrication -Lighting -Full chip protection cabin
Equipment: - Cybelec control DNC 900 - electrical backgauge - Angle measuring system - Matrix displacement - support arms - incl. new CPU card (value of 3,500.00)
- Foot switch for up and down - 1 lifting cylinder - HAWE hydraulic unit with tank attached to the base frame - Safety frame with limit switches
max.bending height: 200 mm Cutting capacity max. (St): 150 x 14 Punching capacity max. (St) Ø 35 Guide height: 200 mm
Robust pallet trolley for the safe and easy transport of pallets in Workshops, warehouses or factories - Made in Germany. - Four catch corners prevent the load from slipping during transport. - The pallet chassis can be moved easily due to the castors maneuver. The transport can be carried out with little rolling resistance will. Equipped with: - 2x fixed castors Ø175 mm -2x swivel castors with parking brakes Ø 175 mm
Open front storage box with carrying rod LAGER FIX - GR. 3 (different manufacturers Schäfter etc), L 352 x W 220 x H 200 mm, 11.5 l, galvanized **while stocks last. Various boxes in stock - number of items on request!
Workbench - Made in Germany Industrial quality, particularly robust and durable design for the highest Expectations! Workbench top 45 mm thick made of high-quality multiplex beech 3 drawers on the left Right 1 drawer with 1 large compartment Middle open compartment Painting: RAL 5010 blue, RAL 6011 green, RAL 7016 anthracite gray
Crane painted in color RAL 1007 daffodil yellow Operating location hall operation Size / bracket profile LW25 / FormC 75x80 Height of the lower edge of the boom 4393 mm Operating voltage 3 / PE ~ 50 Hz 400 V Trolley power supply Trailing cable, cable slack approx. 800 mm, with flat cable, which is carried along in the profile by means of a cable glider. Number of poles: 4 (3 Ph / PE) Operation from the corridor using a pendant control The pendant control is attached to the trolley while it is traveling. Make: ABUS Length of the control line, including pendant control: 3060 mm ABUS electric chain hoist Chain hoist type GM 2 250.8-1, 1-leg Hook path 4000 mm highest hook position 4000 mm Calculation basis FEM 9.901 Drive group 2m / M5 Lifting, 2-stage (pole switchable) 2/8 m / min Lifting capacity 0.09 / 0.35 kW Duty cycle 60% ED Circuits 360 c / h Trolley driving by hand
- CNC Tisch Voortman V 300
Dimensions saw: 1.3 x 1.2 x 1.5 m Dimensions roller conveyor with length stop: 4000 mm
With NC-controlled backgauge, sheet metal ejection to the front and back and manual cutting gap adjustment including special equipment - Central lubrication via hand pump - Extension motor. Back gauge to 1000 mm
- with separate operation - with table enlargement Ø 3000 mm
** Exhibition machine ** Supply network - Mains voltage 400 V - Mains frequency 50 Hz - Three-phase network type Technical data chain hoist - load capacity 5000 kg - FEM / ISO group 1Am / M4 - Hook path 6 m - Control line length 3.9 - 6.8 m - Weight approx. 144 kg (total net) - Reeving 2/1 - Lifting speed approx. 4/1 m / min - Control voltage 24V AC - Hoist voltage 380-415 V / 50 Hz - ZNK 100 C 8/2 lifting motor - duty cycle 40/20% - Nominal power 3.63 / 0.91 kW - Protection class IP 55 - insulation class F - Ambient temperature -20 ° C to +45 ° C - C dimension 770 mm Technical data undercarriage Type EU56-200 - Flange width 98 - 200 mm - Flange thickness max 30 mm - Flange height min 128 mm Technical data trolley travel motor - Travel speeds 24/6 m / min - ZBF 71 A 8/2 travel motor - duty cycle 40/25% - Rated power drive motor 0.34 / 0.09 kW - Nominal current 1 / 0.76 A - Motor speed 2785/675 min¯¹ Control unit Control line with control switch - Control switch: DSC-5 - Control line: height-adjustable standard control line 3.9 - 6.8 m
for horizontal transport of smooth, dry and airtight Plates. . Robust support structure made of steel, painted in RAL 2000 with low weight. . Galvanized longitudinal traverse with a length of 2,000 mm. . 3 pieces of galvanized crossbars with a length of 1,000 mm. . 6 spring-loaded, articulated and adjustable suction cup holders. . 6 suction cups Ø 215 mm, the seal can be separated if worn from their metal carrier inexpensively and without tools change. . Low maintenance very high quality dry running Rotary vane vacuum pump with a suction capacity of 8 m³ / h and an ultimate vacuum of 85% (150 mbar). Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with an isolating transformer (necessary if the vacuum lifter is connected via the Trolley of the crane and this has no neutral conductor). . Operating handle can be extended to 1,000 mm from the center of the crossbar. Stable sheet metal pocket for your crane control included at no extra charge. (You're welcome let us know the dimensions of your when placing your order Crane suspension button with) . Operation "suction / release" by means of a hand slide valve: The wear-free and very robust hand slide valve ensures safe suction and release after actuation of the Release button. (2-fold loosening according to EN 13155) . Control and safety device for vacuum lifter: - Robust control box. - Contactor circuit for the vacuum pump. - Safety warning device with acoustic signal generator. - Vacuum meter with danger zone display. - Large vacuum storage tank with safety check valve - 2-fold actuation when releasing the load. . Fine dust filter to protect the vacuum pump. . Detailed and easy to understand documentation. Warranty on material and manufacturing defects for one year Single shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - According to EN 13155. . Packaging for truck transport. incl. 6 ball valves for switching off individual suction cups, thus also smaller ones Formats can be lifted without suction cups or traverses having to move. (also useful for maintenance work) incl. 1 pc spiral connection cable small helix: - with an extension length of 3,500 mm, execution as Extension cable with CEE plug and coupling. - is led to the lifting device next to the load chain.
Year of construction 2020 **demonstration machine, as new** Easy ARC 01.02 FD-B6 Welbee P500L welding robot station MIG / MAG / water-cooled / torch RTW5000H / welding robot type FD-B6 with welding table 2000x1200mm Hole diameter 28 mm The mobile welding cell for the craft business Setting range MIG / MAG 20 - 500 A Steplessly adjustable switching levels Duty cycle at max.current 40 ° C 50% Current at 100% ED 40 ° C 410 A Wire feed speed 0 - 22 m / min
In contrast to most vacuum systems / lifting systems, the SOLIDswing constructed so that the recorded disk always remains vertical when it is recorded vertically. The plate can without precise positioning of the Suction cups are accommodated and this is independent of the balance Way of working much faster and safer than with conventional manual ones Vacuum systems.
Lifting time: approx. 26 sec Lowering time: approx. 26 sec Operating pressure: 170 bar - Button for up and down - 2 lifting cylinders - Hydraulic unit with tank attached to the base frame - Safety protection frame with limit switches
For private or professional use for the maintenance of paved surfaces The hand sweepers are popular in areas, sidewalks and facilities as well as winter services ideally suited for working widths of 1000mm! Engine: HONDA GXV160 Free sweeping design Brush dimensions (mm) 330 x 1000 Brush trim 100% nylon Mechanical side adjustment Snow blade with rubber strip - without collecting tray
Radial brush WR 870 Honda Brush: Wire PPN mixed trim Max. area performance: 2,500 m2/h Wheels: pneumatic tires 260/85 with ball bearings (groove ball bearings) - Equipped with high quality Honda engine for consistent power - gets into every corner, sweeping out imperfections perfectly thanks to its brush angle - perfect for moving large amounts of forage in agriculture - Removal of large masses of debris / snow - regular sweeping with the wire brush achieves very convincing results in environmentally friendly moss control without chemicals Special equipment: - Industrial engine: Honda GXV 160 OHV 4-stroke petrol engine
suction Dustomat-160S year 2003 Smallest workpiece length: 4 mm
SEVERT double column rotary positioner Load capacity (2x10000kg) 20000 kg Torque clamping plate 13000 Nm Chuck plate rotation angle n x 360 ° Chuck speed 0.10 - 1.0 rpm. Chipboard diameter 120 mm Chipboard thickness 40 mm Rotary axis height 1100 mm Welding current return, at standstill 800 A Displacement, clamping plate distance 5500 mm Electrical data: Power requirement approx. 4 kW Connection value approx. 5 kVA Current consumption approx. 12 A. Pre-fuses at least approx. 16 A Connection to plug XS01 on the control cabinet
Flame cutting machine plasma with bevel head including suction DONALDSON power source Kjellberg HiFocus 360i (operating hours 6781h - as of KW 43/2021) Machine can be viewed under power - Available from April / May 2022 !!
Flame cutting machine plasma including suction Power source Kjelberg HiFocus 280i (operating hours 6016h - as of KW 43/2021) Machine can be viewed under power - Available from April / May 2022 !!
SEVERT double column rotary positioner Electrical data Power requirement approx. 4 kW Connection value approx. 5 kVA Current consumption approx. 12 A. Pre-fuses approx. 16 A Connection to plug XS01 on the control cabinet - Operating instructions available
CNC-controlled portal cutting machine -NEW, immediately available from our stock- Double portal bridge in stable and air-cooled steel frame construction, special can be used for all thermal cutting processes. - Power source HiFocus 161i neo - SATOCONTROL_4.0 control (touch screen version) - 5 m heavy machine runway - SATOTEC flap-controlled extraction table 1,600 x 3,300 mm - Filter unit / fan unit with 2x2 cartridges 3,300m³/h. - CAD / CAM software Libellula Wizard 3 Plasma technology: - SATOMATIC HV S 250 PT CNC arc height sensing Oxy-fuel technology: - Oxy-fuel equipment up to 150 Nm³ gas volume control ** more detailed technical data on request
Without power source
Heavy version with motorized drive for the upper and bending beam and segmented upper beam / 3772940 - Foot control enables the sheet metal to be positioned with both hands - The workpiece is clamped and bent using a motorized chain drive - Setting the bending angle manually, reading the angle on a scale ring - Many bending options with segmented upper beam - Exact movement of the bending beam via large flat guides - Heavy, robust welded construction Segment division: 25-30-35-40-45-50-75-100-150-200-200-270-400-400 mm VA steel: 0.8 mm Aluminum: 2.0 mm
Modular plug & play airtower for hall extraction of welding fumes with integrated, soundproofed Fan, automatic, differential pressure controlled Filter cleaning, system control with color display, particle pre-separation and IFA - tested filter cartridges. The system is for a volume flow of average 20,000 m³ / h designed 1st filter stage - main filter: Filter area: 222 m² Number of filters: 6 pieces Dust class according to DIN EN 60335-2-69: M. Degree of separation: 99.9% Cleaning: Jet - Pulse Compressed air connection: NW 7.2 mm, 4-6 bar, oil and water free 2nd filter stage - fine dust filter. Filter area: 65 m² Filter class according to ISO 16890: ISO ePM1 80% 3rd filter stage - Synthetic fiber mats: Filter area: 8 m² Filter class according to ISO 16890: ISO coarse 60% Total filter area: 295 m² Dimensions: Width filter unit: 2,066 mm Depth filter unit: 1,756 mm Height of filter unit: 3,643 mm Dust container: 200 liters Version Sanders incl .: - NOVUS efficiency package FT20.000 - timer - NOVUS particle sensor
Heavy deburring and rounding machine with six oscillating transversal Disc aggregates in working width 1500mm || - 2 disc aggregates infeed side with each: large diameter 250mm for a lot of grinding time, 2.2kW drive, separate Height adjustment for fine adjustment with Teflon guides and handwheel with digital counter for quick compensation of tool wear | - 2 Central disc aggregates each with: large diameter 250mm for a lot Grinding time, 2.2kW drive, separate height adjustment for fine adjustment with Teflon guides and hand wheel with digital counter for quick compensation the tool wear | - 2 disc units outlet side with each: large Diameter 250mm for a lot of grinding time, 2.2kVV drive, separate Height adjustment for fine adjustment with Teflon guides and handwheel with digital counter for quick compensation of tool wear | - Transversal oscillation of the disc units across the feed direction for Uniform tool wear, gear motor 3 kW and bilateral Toothed belt drive with infinitely variable oscillation speed via Frequency converter, two stroke stages (full stroke and small stroke for Small parts processing) | - robust, dust-resistant linear guide for Oscillation movement | - closed machine housing for less Dust pollution in the environment | - four spring-loaded rubber hold- downrollers, move together with disc station in height, additional separate Adjustment option as well as pneumatic lifting by switch (for processing small workpieces) | - Conveyor belt feed with continuously adjustable Speed ??1-5 m / min via gear motor | - pneumatically controlled Conveyor belt centering for problem-free belt run | - constant table height (Throughput height) for use in production lines | - maximum workpiece height 100mm | - Motorized height adjustment of the workpiece thickness using the up / downbutton incl. electronic digital display | - Switch for tool change, machine public to max.workpiece thickness | - Guiding of the complete grinding unit in 4 heavyunits Round guides and screw jacks with trapezoidal thread spindles | - control panelwith lockable main switch, feed switch, rotary control for Feed speed, switch for disc drive infeed with right / left rotation as well as rotary control for disc speed, switch for central disc drive with right / Left-hand rotation as well as rotary control for disc speed, switch for discspeed, Spout with right / left rotation as well as rotary control for disc speed,switch for Oscillation (full stroke / small stroke) and controller for Oscillation speed, switch for tool change | - strip brush for Conveyor belt scraper | - Extraction connection 1 x 200mm diameter | - Emergency stop button at the machine infeed and outlet | - emergency stop when the doors are open (right and left) | - Inlet protection flap for workpieces that are too thick with emergency stop | - Operating voltage 400V, 50Hz, air connection 6-8bar with maintenance unit | - Operating instructions || Machine included with: | - Combidisc 0 250 instead ofSoftdisc 0250 | - Slag hammer Disc 0 250 mm 55 ° Shore A | - Stepless speed Disc aggregates 400 - 1600 RPM, separately adjustable for two discs each at theinlet! Center / outlet via three frequency converters | - Rotating cleaning brush for Brushing off the conveyor belt, brush diameter 120mm, width 1500mm, drive via gear motor 0.37kVV | - LED lighting machine room one LED each Light bar at the inlet and outlet, protection class IP 65 | - Magnetic trackwidth 250mm Permanent magnet for holding small parts, not switchable | - Deduster UT-T3 Dry suction || Technical data dust extractor: | Motor: 3.0kW, 50 Hz / 400 V | Max. Air volume: approx. 5,200 rn 3 / h | Operating point: approx. 3,200rns / h | Max. Negative pressure: approx. 3,100 Pa | filter area: 20 m 2 | filter: 2 filtercartridges, antistatic (use category M) | intake: Ø 200 mm, left | discharge: upwards, from fan housing | version with integrated Cyclone separator, consisting of: | - pre- separator module | - integrated Cyclone | H-Line control (BG2, 3.0 kW) | Version for stainless steel dust in accordance with W3 Consists of: | - Volume flow monitoring | - Display evaluation | Discharge: Dust collection container (approx. 50 l) | Design: stationary, with Feet | Dimensions: approx. 970 x 850 x 2,785 mm (WxDxH) || - Electric Link for dry suction The suction system starts and stops with the Deburring machine | - Suction tube kit 0200 for UT-T3 -standard- for direct Connection between machine and extraction system.
- Lower roller adjustment, both lower rollers can be adjusted hydraulically - Machine base - horizontal and vertical work use - foot switch / Control panel - standard rollers (divided) - 2 driven rollers - CE mark / Declaration of Conformity - Operating Instructions in German
The Professional 750 table article no. 4-280040.P 3000x1500x200 mm has a Hole arrangement in a 100 mm grid on the table top and a parallel one Hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has one Material thickness of approx. 24.5-27 mm and is made from high quality steelS355J2 + N manufactured. Grid lines at a distance of 100 mm make it easier for you to set up your Contraption. The welding tables are provided with a scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X
ungültige zeichen im text
- hydraulic 4 roll bending machine - Conical bending device - Induction hardened rollers - Digital display for the two side rollers - mobile control panel - 2 speeds - hydraulic folding bearing - CE mark / declaration of conformity - Required instructions
- hydraulic horizontal bending machine - Solid work surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - Double foot switch
Electric tapping machine / 4450136SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting of thread size, speed, pitch and cutting depth via Touchscreen on the swivel arm - Manual mode: the stops after the set cutting depth is reached Spindle automatic, forward and reverse must be activated manually. - Automatic mode: changes after the set cutting depth is reached the machine automatically from the forward to the return - ideal for that Thread cutting of several blind holes Incl. 1 each GT12 M6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30, M33, M36 Substructure 900 x 600 x 875 mm
Furnishing: - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - Digital display
for horizontal transport of smooth, dry and airtight Plates. Robust support structure made of steel, painted in RAL 2000 with low weight. 6 suction cups Ø 215 mm, the seal can be separated if worn from their metal carrier inexpensively and without tools change. Low maintenance very high quality dry running Rotary vane vacuum pump with a suction capacity of 8 m³ / h and an ultimate vacuum of 85% (150 mbar). Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with an isolating transformer (necessary if the vacuum lifter is connected via the Trolley of the crane and this has no neutral conductor). Control and safety device for vacuum lifter: - Robust control box. - Contactor circuit for the vacuum pump. - Safety warning device with acoustic signal generator. - Vacuum meter with danger zone display. - Large vacuum storage tank with safety check valve - 2-fold actuation when releasing the load.
Accesories: -Machine light (built-in) -Coolant device in the foot (built-in) -Keyless chuck 3 - 16 - Insertion spigot MK 4 -Reducing sleeve 2:1 -Reducing sleeve 3:2 -Reducing sleeve 4:3 -drive-out wedges -Slot Nuts -Machine vice Promat 125 mm
Electric tapping machine / 4450124SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting the parameters via touch display on the swivel arm - Both manual and automatic switching from forward to backward to reaching the entered Incl. 1 each GT24 M6, M8, M10, M12, M14, M16, M18, M20, M22-24 tapping chuck Substructure 900 x 600 x 875 mm
Screw compressor with dryer, oil-lubricated - overhauled -
- Operating hours 947 hrs. Read the counter - Platform height 10 m - Drive via 24 V electric motor with integrated charger - 2 speed levels - Non-marking tires - Tire size 15 x 5 x 11 ¼, wheelbase 1850 mm - Wheel formula 4x2 - Overall dimensions 2410 x 1170 x 2390 mm (without railing 1790 mm) - Foldable railing - Basket dimensions (in length x width x height) 2260 (+ 900) x 1150 x 1100 mm - Extendable platform 900 mm - Basket and floor controls
mit höhere Drehzahl: 6,6 m/min
- chip conveyor - The machine is dismantled
- Commissioning: January 2017! - with Siemens828D including Shopmill - Flat top chip conveyor - Spindle with 12,000 rpm, SK 40 - Internal coolant supply up to 30 bar - Tool magazine with 24 places
With V-belt drive in a modern design / 3020640SET - Heavy execution of the whole machine - Very smooth running thanks to the new spindle design - industrial engine - Separate emergency stop impact switch - drilling depth stop - LED machine light integrated in the drill head - Precisely machined, stable drilling table with diagonal T-slots with circumferential cooling water channel - Drilling table can be tilted ± 45 ° and rotated 360 ° - V-belt cover with safety switch - Precision spindle bore - Machine operation of safety electronics in 24 V DC voltage - Guaranteed concentricity = 0.02 mm measured in the drilling spindle - Thick-walled steel column for high force absorption and stability - Solid, large base plate with T-slots scope of delivery - Keyless chuck 0 - 16 mm - T-nuts - Expeller - Adapter MK 4-B16 - operating tool - Machine vice BMP 160
Compact, powerful workshop double miter band saw for cuts of 45 ° right to 60 ° left AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and setting of the Cutting pressure via compensating spring Description: -Manual cutting cycle and automatic cutting -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Large turntable for precise miter adjustment -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vise with quick adjustment and quick approach to the material - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Saw band tension with limit switch to check the correct band tension -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band
- l-steel flat 80x15 (d700) mm - L-steel upright 50x10 (d800) mm - Angle steel 40x5 (d500) mm - Round material 30.0 (d700) mm - Solid material Ø 35.0 (d700) mm - Pipe diameter max. 60x2.0 (d1200) mm - Square material 50x30x3.0 mm
with electrical angle adjustment / 1541500 - For quick and easy welding from all sides - Easy handling - Simple angle adjustment using a rotary knob - Infinitely variable speed of the plate with right / left rotation - Control electronics protected by a robust and closed housing - Foot switch for start / stop
- Split upper, lower and rear tool - Upper tool with quick change system - Quick foot clamp - Angle stop - lockable - manual backgauge 500 mm - mobile
- FANUC Series 18i TB Control, Manual Guide i Function - Central control panel for machine and CNC control on the pedal arm 45 ° swiveling - 12-fold tool turret - Fanuc drive with 30 kW (50% ED) - Chip conveyor - Bezel - 3 jaw chucks
Powerful miter band saw for cuts from 45 ° right to 60 ° Left Electro-hydraulic semi-automatic machine with microprocessor control and 4 Modes of operation Description: - Indexing at 0 ° / 45 ° / 60 ° and internal table clamp for Intermediate angle - Control panel on vertical post, swiveling, contains all Controls - Control with soft-touch keyboard, backlit display for display all machine parameters and messages in plain text, including: Number of cuts (piece counter) / cutting time / power consumption of the Saw band motor / saw band tension in kg (minimum band tension = 900 kg) / Saw frame position (Y-axis) / Alarms / Faults (description and causes) / Diagnosis - Saw band tension with band tension control and indication on the display by means of electronic converter - Underframe with lockable door and removable coolant tray electric coolant pump - Vice with quick adjustment - Chip removal brush for cleaning the saw band Standard equipment: - Bi-metal saw band - Adjustable length stop 600 mm - tool kit - Detailed operating instructions, maintenance manual, circuit diagrams and Exploded view - Attachment adapter for supply roller conveyor incl. 1 support roller - Entry possibility for forklift / pallet truck transport
Miter left 60 ° Quick-release vice can be moved in the X-Y axis Quick release lever for easy handling Machine base with automatic cooling Electrical monitoring of band tension + band breakage, saw band cover. The saw only runs when it is OK. AutoCut additionally: Economical, semi-automatic operation through automatic saw frame lowering - continuously adjustable Hydraulic brake cylinder for stepless feed via limit switch Rapid traverse (rapid approach to the workpiece) Manual operation possible
45 ° / 45 ° inside and 45 ° / 45 ° outside|Clamping device: 4x pneumatic horizontal|Cooling and lubrication device via pneumatic mist spray device|Safety device: two-hand control, pneumatic saw area lowering, 800mm safety circuit
equipments: - controlled axes: Y1, Y2, X. R - CNC controlled crowning - controlled backgauge - Hydraulic tool clamping top and bottom - Pneumatic matrix displacement
For collecting and disposing of bulk goods and industrial waste - Tipping container - forklift attachments for in-house storage of Bulk solids - powder-coated in standard color: RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray / special paint on request - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges Container volume: approx. 600 l
Bench drill / 3020625TSET - Heavy execution of the whole machine - Very smooth running thanks to the new spindle design - industrial engine - Separate emergency stop impact switch - drilling depth stop - LED machine light integrated in the drill head - Precisely machined, stable drilling table with diagonal T-slots with a circumferential cooling water channel - Drilling table can be tilted ± 45 ° and rotated 360 ° - V-belt cover with safety switch - Precision spindle bore - Machine operation of safety electronics in 24 V DC voltage - Guaranteed concentricity = 0.02 mm measured in the drilling spindle - Thick-walled steel column for high force absorption and stability - Solid, large base plate with T-slots scope of delivery - Keyless chuck 0 - 16 mm - T-nuts - Expeller - Adapter MK 3-B16 - operating tool - BMP 100 machine vice
Pallet truck TOYOTA / BT SWE 120 NEW Dimension over the forks: 570 mm Mast type: Duplex Tele Stroke: 2900 mm Free lift: 166 mm Mast retracted: 1940 mm Tires: Drive wheel: Friction Energy package: Battery 24 225 Ah with Aquamatik Including charging and power cord **Incl. Additional equipment: - Plexiglass finger protection - Sensilift for the most controlled lifting and lowering - Pedestrian drawbar - Medium battery compartment with metal battery compartment cover
Furnishing: - MOMENTUM GEN - 2 fiber laser cutting machines 3,000 x 1,500 mm - Resonator Ytterbium YLS 6000 compact (6 kW) - Beckhoff controller - Precitec ProCutter Automatic cutting head - autom. Lubrication system - CAD / CAM software LANTEK EXPERT CUT - 17 "touchscreen, keyboard, control panel - Collective conveyor under the cutting table - additional loading unit Cutting capacities: - normal steel 25 mm - stainless steel 15 mm - aluminum 12 mm - brass 8 mm - copper 8 mm Workspace: - max.: 4000 x 2000 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - max.axis speed: 100 m / min (simulated) - Axis speed X / Y: 100 m / min (single) - Positioning accuracy: + - 0.03 mm / min - Burning height: 125 - 200 mm Loading table: - Number of pieces 2 (35 seconds for changing) - automatic change of tables - max.load 2,500 kg. assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminum - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system - Sick light barrier safety device - Spare part basic supply package Why Fibermak? - Up to 3 times faster cutting compared to other laser technologies - Machines for cutting thin sheets - axes equipped with linear motors / Servo motors reach up to 141 m / min. - Accelerations up to 2G - Fiber laser is the green laser technology (Saving of at least 50% energy costs) - There is no need for laser gas mixing - There is no need for optical Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - Extended options: cutting from reflective materials like aluminum, copper, brass etc., - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, equipped with world-famous, durable, high-quality components - ERMAK passes the price advantage on to its customers thanks to its fast and high quality production - Creative design, constant, highest technology and quality are the most important principles - High reliability - High efficiency - High quality - CE declaration
The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading and trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.
Pallet truck TOYOTA / BT SWE 120 year of manufacture 2017 with platform self-folding up Standard equipment: - BT power drive - Electric fingertip buttons - Electronic Regenerative Bremen - Electronic cruise control - Operator security - Storage compartments - Creeper function Measure over the forks: 570 mm Mast type: Triplex Hilo Stroke: 4150mm Free lift: 1554 mm Mast retracted: 19790 mm Tires: Drive wheel: Vulkollan energy package: Battery 24 225 Ah with aquamatic incl. charger and mains cable
Pallet truck TOYOTA / BT SWE 120 year of manufacture 2017 with platform self-folding up Standard equipment: - BT power drive - Electric fingertip buttons - Electronic Regenerative Bremen - Electronic cruise control - Operator security - Storage compartments - Creeper function Measure over the forks: 570 mm Mast type: Triplex Hilo Stroke: 4150mm Free lift: 1554 mm Mast retracted: 19790 mm Tires: Drive wheel: Vulkollan energy package: Battery 24 225 Ah with aquamatic incl. charger and mains cable
- Suitable for various blasting materials, e.g. quartz, glass ball, Plastic ball, etc. - Ideal for cleaning, derusting or removing paint from all metal parts Type, e.g. engine parts, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety when machining workpieces because of the Window with glued protective film - Dust-free work due to all-round seals on the cover and door frames - Stable storage grid enables workpieces to be placed in the cabin interior - With drain opening for changing the blasting material - Suction pipe for the blasting material attached to the bottom of the collecting container - With compressed air connection on the outside - Glass bead abrasives, corundum abrasives, silicon carbide, plastic Blasting media, etc. can be used Equipment details: - Very large, upward-opening front flap with gas pressure springs for quick access and easy loading and unloading - Integrated suction system with exchangeable air filter - Jet gun without finger trigger - Air flow is controlled via Foot pedal - Four fluorescent tubes (230 volts), in a separate housing with protective screen and exchangeable protective film, including five replacement films - 2 separate switches for suction and cabin lighting - Regulation of the working pressure via pressure regulator with manometer - Cross struts on the feet allow easy transport with the pallet truck
-The powerful, 2-stage gear was specially designed for cuts in solid material designed -The user has a total of 4 blade speeds for optimal adjustment the material available -The large bearing rotary table with internal table clamping and Precision stops at 0/45/60° ensure quick adjustability miter cuts -The vice with quick clamping (optional is a pneumatic one Vise = MA, available) is with screwed vise jaws Mistake. With their ribbing, these ensure optimal hold of the workpiece -Underframe with lockable door, chip drawer and removable Coolant pan with electric coolant pump -Chip removal brush
The "Easy T" is the cost-effective alternative to the conventional ones grinding and deburring machines. His head consisting of a grinding wheel and a flap brush, can be swiveled by 180°. Thus, a faster Switching between the aggregates possible. Due to the weight-bearing arm the head can be easily moved over the workpiece. The result is one even edge rounding. The pad also prevents slipping of the smallest components. Furnishing : - Deburring and rounding of laser-cut or stamped sheet metal parts - Grinding head, consisting of a grinding wheel & a flap brush, can be swiveled by 180° - Working area 800 x 1300 mm - Weighted arm for easy pivoting - non-slip table pad - Ergonomic operation of the machine with the help of push buttons "On/Off" - Grinding head with infinitely variable speed via frequency converter - Handle for ergonomic handling
- upper tool, divided 4050 mm (new) - block tool 4050 mm: V16, V50, V20, V35 (new) - Pneumatic tool clamping above - CNC controlled crowning - controlled axes: Y1, Y2, X, X1, R, Z1, Z2 - Support arms movable on linear guide and height adjustable - Fiessler photocell - Stmer ESA S560 Touch
-------------------------------------------------- --------- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment -------------------------------------------------- --------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German
- In 2016 the machine was completely overhauled by MEBA!
- 7"TFT LCD display with touch function: * Manual input of spindle speed setpoint * Speed display actual value * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Service information * Selectable user language: DE/EN/FR/ES/IT/NL/RU - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (locking) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts, protection class IP54 - Feed overload protection - Machine oil first fill; Oil bottle, loose delivery - Paint finish: DD structure paint signal white RAL 9003, Pantone 7545c, black
- Fully automatic ALU circular saw - Miter left + right 45 ° - Head bevel cuts up to 45 ° - pneumatic vertical clamping device - Vice before and after the saw blade, for low-burr cuts - Material hold-down roll - Integrated coolant spray device - Chip extraction nozzle on the saw blade protective hood - Simple feed 530 mm - Cut-off length min. 4mm max. 9999 mm - 3000 mm feed roller conveyor - 2000 mm discharge roller conveyor - Chip extraction system CNC Control: - Over 90 different sawing programs with 99 sub-programs - automatic feed unit 2000 mm via ball screw spindle - incremental feed with automatic length compensation - adjustable for gate lengths from 25 - 9999 mm - Fully hydraulic control of the saw frame and clamping devices - Preselection of 3 different material feed speeds
Furnishing: - hydraulic roller drive - Planetary gear delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - Hydraulically adjustable side straightening rollers - mobile control panel - 3 powered rollers - Digital display - Machine can be used horizontally and vertically - CE mark / declaration of conformity - User manual in German Special accessories included in the price: - hydraulic side roller adjustment
For collecting and disposing of bulk goods and industrial waste - Tipping container - forklift attachments for in-house storage of Bulk solids - powder-coated in standard color: RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray / special paint on request - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges Container volume: approx. 600 l
- Upper and lower roller electr. driven - Upper roller can be swiveled out - Conical bending device - Asymmetrical roller arrangement - self-braking main engine - separate control and operating panel - Safety lanyard - foot switch - Operating instructions in German - CE mark / declaration of conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - digital display